registered members don't get popups... just sayin

  • Get the best VPN on the market with 66% Discount!
Software » Mac OSX
Pro Tools HD 10.3.9 for Mac [WORKiNG] screenshot
Mac OSX | 02.06.2014
Pro Tools 10 software is the latest version of Avid's flagship music creation and audio production software, and delivers many great new features.
Speed up editing and mixing workflows with Clip Gain.

Work more easily with AudioSuite-rendered clips with reverse processing handles and other new workflows.
Get great responsiveness on slower hard drives with the enhanced disk handler.
Work with more plug-ins and maintain total phase accuracy with 4x more Automatic Delay Compensation (16k vs. 4k in Pro Tools 9).
Create bigger mixes in Pro Tools HD, with higher track counts.
And get over 500 new Pro Tools commands when using
Artist Series, System 5, and other EUCON-enabled consoles.


Just in case Avid changes the protection
(or you get paranoid downloading from avid )
I made a mirror of the 10.3.9 installer available as of now, you'll find it in the peeplink.

Be sure to watch the video and to read the readme.rtfd included.
(famous Apple's text format that stands for Read The Fucking Document)

This crack is finally working, the only downside is that you must use
the fade tool to create fades, if you use the menu item "Create Fades"
or the shortcut cmd+F it crashes, so don't try, btw the fade tool
is the easiest and fastest way to create fades in PT so you should use that anyway.

Fix Notes:
Many people faced problem with the previous patch+loader,
I made a mistake to share it on the wave of enthusiasm,
it was in a too early stage and not fully working.

Now we think this can be declared a final crack,
openssh spotted the pseudo-random iLok checks and circumvented the CRC checks,
it's now totally usable unlike the previous partial crack.
The new loader should be fool-proof. Just follow instructions.

Reversing and patch scripting by openssh.
Loader applet by copylefter.

Have fun!


Reuploaded. PiRAT

download from any file hoster with just one LinkSnappy account
download from more than 100 file hosters at once with LinkSnappy.
audioz mirror
http://http://peeplink.in/a864c0637fce

comments

  Member 5.06.2014 37
+45
Hola Svenj,

A veces me pasa eso que dices y lo que hago es simplemente cerrar todo (probablemente tengas que usar "Forzar salida..."), esperar unos 5 segundos aprox. a que se vacΓ­e la RAM y volver a intentar todo el proceso. Es importante que tengas activada la casilla de "Activar acceso para dispositivos de ayuda" en las Preferencias del Sistema > Acceso Universal.

En un par de ocasiones me sirviΓ³ tambiΓ©n iniciar todo pero con la casilla de "Activar acceso para dispositivos de ayuda" desactivada, obviamente no va a iniciarse el Pro Tools asΓ­ pero al fallar todo y nuevamente volver a activar la casilla de "Activar acceso para dispositivos de ayuda" e iniciar todo de nuevo... es como que se resetea todo y agarra nuevo impulso. SΓ© que suena raro lo que digo pero hay que encontrarle el modo.

TambiΓ©n tienes que usar el BatChmod para corregirle los permisos tanto al Loader como al archivo de Pro Tools. Pero supongo que esto ya lo has hecho....

Honestamente ignoro las causas de por quΓ© a algunos le funcione de primera y a otros no tanto pero esto que te digo lo he logrado picΓ‘ndole a todo lo que se me ocurrΓ­a.

Saludos y espero que te funcione!!
  Member 17.01.2014 87
+2
Well i think i´ll make a new installation, when i first installed i did not used the batchmod, cause i always use blank sessions and i still have ¨bus¨crashes!! :( damnnnn
  Member 5.06.2014 2
0
Hi!
Sorry to bother you, but I tried everything I could come up with and didn't find a solution. I have the same Problem as some others. When I try to start the Loader it says "The action β€œRun AppleScript (Launch PT)” encountered an error." and stops immediately. I'm using OSX 10.9.3, I downloaded the "Pro_Tools_10_3_9_Mac_81790.dmg" almost a week ago from the AVID website without the download manager, I downloaded the "PT10[K].7z" from all possible locations and unpacked it with keka, I batchmodded everything in every way (after trying without), cleaned the whole accessibility list and made it new from scratch (even with the command lines from your mavericks fix), of course I uninstalled everything and installed it again, and yes - the loader is in the protools folder. I don't know what else to do. Could you help me?
  Resident 9.05.2014 1 503
+85
Does this help at all?
How to enable access for assistive devices on Mavericks

When you say you've downloaded the loader and patched protools from all locations, that to me is a bit of a worry.
I'd suggest deleting every single one of them and re-downloading this one.
For all you know you could be using an old loader and not even know about it.

Also you'll need to unlock system prefs and drag the loader onto the app list to enable assistive devices.
I'm on Mountain Lion so it was pretty straight forward for me. Sorry I can't help much with Mavericks.
Go back and read all the comments because there are one or two Maverick users here that have got it working.
In 2010 I gave up women and Booze. It was the worst 20 minutes of my life.
  Resident 9.05.2014 1 503
+85
quote by dfekt0Created an account just to confirm that this works on Mavvy 10.9.3. People who are having problems with this must be missing steps or doing something wrong.

Steps I used:

1. Installed Pro Tools (I just used the Avid download)
2. Used Keka to unpack the loader, etc.
3. Copied the Loader and the k'ed PT file to Applications/Avid/Pro Tools
4. Batchmod-ed them both...clicked all the checkmarks for both to get full ownership and permissions, blah blah blah.
5. After Batchmod-ing the loader, opened up System Preferences > Security and Privacy > clicked the padlock > dragged the loader into the list. Hit the padlock again to lock it back up.
6. Double click the loader to start PT.
7. Done.

Will report back if I run into any glitches. I didn't need to do any of the terminal hacks or any funny business to get it running. Just make sure to use Keka and Batchmod.

Big thanks to you guys for finally getting this out there! Appreciate it.
In 2010 I gave up women and Booze. It was the worst 20 minutes of my life.
  Resident 8.10.2011 2 445
+100
quote by IbrahincHola svenj! que OSX tienes? yo tengo el mismo problema... estoy en contacto con copylefter para trata de buscar una soluciΓ³n a este problema... yo tengo mavericks 10.9.3



es curioso que les pase ese problema yo tengo Maverick 10.9.3 y Pro Tools funciona sin problemas,hasta ahorita no me a dado ningun problema,de hecho yo no tuve que batchmod Pro Tools o el Loader de Pro Tools.

al principio el problema que tuve fue que le di next al pro tools loader antes de que pro tools terminara de cargar la session,sigan los pasos del video o del readme file.
  Member 11.02.2014 10
+1
No entiendo que hice mal.. yo me guiΓ© tal cual por la guΓ­a de instalaciΓ³n y el video... pero me sigue dando el mismo error... ya borre todo... voy a comenzar de nuevo paso a paso a ver si logro instalarlo.. una pregunta.. que es el batchmod??
Rock and Roll Forever!!
  Resident 2.05.2011 118 2610
+13063
Ok guys I just tried many times on 4 different 10.9.3 clean installs, and guess what? It works. Every. Single. Time.
I'm starting to think that either:
- all errors are on 10.9 cause Mavericks is the system preferred by fools
or
- the compatibility problem is not with mavericks, but with the machine.
As the bitslicer included is an alpha version it may still be buggy. Dunno.

To start with, many of you are on 10.9.1 or 10.9.2, so update to 10.9.3,
that's the system I tested it on and which works.
I did a video for Mavericks installation, you can download it here:
(Dunno why but I can't upload to Vimeo, 429error all the time)
Install on Mavericks Tut
[RETiRED]
  Member 11.02.2014 10
+1
Ok... I don't know what I did bad... for third time I'll download the installer and patch.. I hope works this time.. Thanks for your help copylefter!!
Rock and Roll Forever!!
  Resident 2.05.2011 118 2610
+13063
No need to continue redownload installer, that's it.
Just use Keka to unpack, that's more important.
[RETiRED]
  Member 4.06.2014 80
+2
I made this video which steps but still the error persists, do not know what happens

Script Failed
An error ocurred trying to run the script on Pro Tools


this is the snapshot when press continue

Script error Snapshot

Run the pro tools on Mavericks 10.9.3
  Member 5.06.2014 3
0
can anyone show how to configure Batchmod?
if possible in figure

grateful
  Resident 2.05.2011 118 2610
+13063
I'm out home and on win right now, can't take screenshot.
just set owner:you group:staff R W X everywhere (all checks).
Don't touch the checks in the bottom of the window.
[RETiRED]
  guest 17.09.2010 181
+4
@ Copylefter

Pro tools 10.3.9 for windows to work the same way would be nice :)
  Member 17.01.2014 87
+2
still unable to use ¨buses¨, what should i do? im on mountain lion, another reinstall??
  Resident 9.05.2014 1 503
+85
What type of busses are you trying to use? Mono, stereo, 5.1, 7.1?
What exactly are you doing at the point of the crash?
It may be something other than the patched protools that's causing your trouble because I can use busses on ML 10.8.5

I don't mean to sound condescending but are you sure its busses that crash it or is it this:
"Bus error" in thread "Main Thread", at address 0x0?
Because that is something totally unrelated to this patched protools.

Also, have you tried to import IO settings from a known working session?

Are you saying busses crash it or are you saying you can't use busses?
Here's a good tutorial on using busses in protools:
Protools busses tutorial

It would be nice if you could let me know how you get on.
In 2010 I gave up women and Booze. It was the worst 20 minutes of my life.
  Resident 9.05.2014 1 503
+85
I've never known so many people having problems installing.
It wouldn't surprise me if it's purely down to over-excitement.
I bet my bottom dollar that some of you are clicking the continue button before the session has had chance to load.
In 2010 I gave up women and Booze. It was the worst 20 minutes of my life.
  Resident 2.05.2011 118 2610
+13063
Guys, other than this I don't know how to help further.
Dunno, may I set up a remote desktop and install it for you?

(kidding uh, don't PM me with request for that )
I feel your frustration, the problem is that I can't reproduce error
on Mavericks, otherwise I could fix it.
Today I'll do some more tests
[RETiRED]
  Member 6.06.2014 6
0
Hello!! Does it work also with Snow Leopard??

THX

Foster
  Resident 9.05.2014 1 503
+85
You clearly haven't read the comments before posting..
If you go back and read them you'll find there are people who, just like Mr Del Monte, say YES! As long as your operating system is running in 64 bit mode.
In 2010 I gave up women and Booze. It was the worst 20 minutes of my life.
  Member 5.06.2014 2
0
I have some interesting news regarding the "The action β€œRun AppleScript (Launch PT)” encountered an error." problem on 10.9.3 - when I start the Pro Tools app and start the Loader app immediately afterwards it works!
  Member 6.06.2014 6
0
quote by bulangatYou clearly haven't read the comments before posting..
If you go back and read them you'll find there are people who, just like Mr Del Monte, say YES! As long as your operating system is running in 64 bit mode.

Great!! Thank you
  Member 6.06.2014 12
0
This is really cool !
for me its working without using the laoder!
I just run the Pro Tools app without an error.
I'm runnin the latest version of Mavericks.

Steps:
1. Installed
2. Replaced Pro Tools.app
3. Start

thats all i did and it works great !

UPDATE: The only Error I get is by quitting Pro Tools "Authorization Error : Pro Tools 10 cannot run because it is corrupted. Please try reinstalling the product"

But that doesn't matter because its only popping up if I quit Pro Tools and I don't get errors while running so its all good :)
  Resident 2.05.2011 118 2610
+13063
Guys why you don't read the thread?
Have you actually did something with it?
Only error on quit? Try to open a bus and let me know...
The loader is needed, otherwise why make it?

btw, listen everybody:
I'm uploading a manual patch for everybody
who have problems that MUST work.
It will solve both 10.9.3 problems and help the very few
people who can't run on other OS X versions too.
Check back in a couple hours, my ul speed is scandalous
[RETiRED]
  Member 6.06.2014 12
0
well i don't know why it's working here without the loader, but i can tell you that on my sys it's really working without the pt loader.
As I said before I only get an error when I quit Pro Tools.
New Sessions, Import and bouncing working fine. I didn't get an error while running Pro Tools.
  Resident 2.05.2011 118 2610
+13063
Make a send on a track to a bus.
If you succeed at instantiating it (unlikely)
repeatedly click on the bus slot to show/hide.
[RETiRED]
  Member 6.06.2014 12
0
okay that causes the same error as on quitting.
My fault... sorry.
Well i'll use that loader when i create new sessions, but only for importing & bouncing it works good without it :)
  Member 6.06.2014 6
0
I've downloaded the Crack file but when I unstuff it (Stuffit destinations OSX10.6.8) a window says "The structure of the archive is damaged"... any Tip?

THX

Foster
  Member 6.06.2014 12
0
as said before just use "Keka" for unpacking that should solve the error.
  Member 6.06.2014 6
0
quote by John2k4Keka

OK; Thank you!!!

Foster

related posts

Ableton Live 11 Suite v11.1 WiNREQ: Suonoporo Virtual Ancient Flutes CollectionAvid Pro Tools HD 10.3.10 Mac OSX [K'd by openssh]Avid Pro Tools HD v10.3.2 and Avid Virtual Instruments 10 for Windows + PAC ...

Spread the Word