you can now donate with bitcoin or your bank card by clicking the piggy icon under the logo

  • Get the best VPN on the market with 66% Discount!
Windows, Mac OSX
Spectrasonics Omnisphere 2.6 Complete WINMAC screenshot
The Pirate I Date: 2019.02.04 I Size: 84GB
Omnisphere® is the flagship synthesizer of Spectrasonics - an instrument of extraordinary power and versatility. Top Artists all over the world rely on Omnisphere as an essential source of sonic inspiration. This award-winning software brings many different types of synthesis together into one amazing-sounding instrument that will spark a lifetime of exploration.

Hardware Synth Integration
Omnisphere is the only software synth in the world to offer a Hardware Synth Integration feature. This remarkable innovation transforms over 65 well-known hardware synthesizers into extensive hands-on controllers that unlock Omnisphere’s newly expanded synthesis capabilities. Simply put, this ground-breaking feature makes using Omnisphere feel just like using a hardware synth! By bridging the physical experience gap between software and hardware, users gain intuitive control of Omnisphere by using the familiar layout of their supported hardware synth. Virtual instrument users can now experience the joy of the hardware synth workflow and hardware synth users can fully expand their capabilities into the vast sonic world of Omnisphere!

Greatly Enhanced Arpeggiator
• New Pattern and Play Modes
• New Presets Library
• New Step Modifiers
• New Chord Voicings
• New Pitch Slides
• New Step Dividers
• Capture MIDI Files!

New Hardware Sound Library
Omnisphere 2.6 includes a stunning new “Hardware Library” with over 1,600 new patches created by Eric Persing and the renowned Spectrasonics Sound Development team. Each hardware profile has a corresponding set of sounds in the Hardware Library which were specially designed using that hardware synth as an Omnisphere controller. These inspiring new sounds feature a wide range of categories and many have a distinctly ‘classic’ flavor! Notably, the 2.6 update takes Eric’s classic sound design work from the original 1987 Roland D-50 into completely new sonic territory with Omnisphere’s vast synthesis capabilities. Best of all, the new sounds are available for ALL users, regardless of using the hardware or not!

Vastly Expanded Synthesis Engine
• Four Layers per patch!
• New State Variable Filters
• Over 500 DSP Wavetables
• Powerful New Granular Synthesis
• 8 LFOs, 12 ENVs, 34 Filter Types per part
• Doubled Mod Matrix
• Full FX Modulation

Includes over 14,000 sounds!

Since the beginning, Omnisphere has been the sonic weapon of choice for creative players and producers in search of next level sounds on hit records, bestselling games and Oscar-winning films. Omnisphere’s amazing sound library is constantly growing and being pushed in fresh directions by the award-winning Spectrasonics Sound Development Team.
This release does not require any previous version. Step by step instructions are included.


MAC INSTRUCTIONS courtesy of TheTard based on FredBloggs guide

 Spoiler:


Reuploaded 🏴‍☠️. PiRAT

download from any file hoster with just one LinkSnappy account
download from more than 100 file hosters at once with LinkSnappy.
audioz mirror
http://http://peeplink.in/42900b469f82 Peeplink password: d8CGd}4d1

comments

  Member 7.04.2019 1
0
I just registered to let you know that this is an Exquisite share!! Thanks!
  Member 15.01.2016 23
+1
Sorry to be a pain, but ... Step 6B: When I run Omnisphere as Admin, I get message: "Unable to access plugin folder at c:\programdata\spectrosonic\STEAM\omnisphere"
According to instructions, there is no STEAM subfolder, only a shortcut to STEAM . <<What is this dummy missing?
  Member 15.01.2016 23
+1
the Comment has been Removed
  Member 24.07.2014 150
+67
The instructions said "C:\ProgramData\Spectrasonics"
and your message said " c:\programdata\spectrosonic"
detail does matter.
  Member 15.01.2016 23
+1
I stand corrected. The error message matches the folder names - ProgramData\Spectrasonics\
  Resident 20.12.2018 23 569
+4913
quote by dim chandelierSorry to be a pain, but ... Step 6B: When I run Omnisphere as Admin, I get message: "Unable to access plugin folder at c:\programdata\spectrosonic\STEAM\omnisphere"
According to instructions, there is no STEAM subfolder, only a shortcut to STEAM . <<What is this dummy missing?


You must check your shortcut path to the STEAM folder AND change permissions on your STEAM folder. I never said there is no STEAM folder. Of course there IS a STEAM folder. The STEAM folder indeed is a subfolder of the Spectrasonics folder. It simply is located where you placed it. The shortcut points you there. Even if placed elsewhere for all practical purposes it is as if the STEAM folder is physical y in C:\ProgramData\Spectrasonics\ . Check path. Change permissions.
The problem is not the problem. The problem is your attitude about the problem.
Глаза боятся, а руки делают.
  Member 15.01.2016 23
+1
Thanks Pirate. Your dedication is inspiring.

Yes, the STEAM folder is on another drive. I've already changed the permissions to that folder and all folders involved. The error message states it can't find the plugin folder in C:\ ...Spectrasonics\STEAM\Omnisphere. That file path does not exist. I have: C:\ProgramData\Spectrasonics. Within that folder are:

plug-ins (folder)
Omnisphere.dll (successfully patched)
Omnisphere (application)
STEAM (shortcut)
AUDIO16.DAT

I'm sure it's a simple fix but I've re-read the instructions several times and can't figure it out.
  Member 15.01.2016 23
+1
I tested in the STEAM shortcut in C:\ProgramData\Spectrasonics. When clicked, it displays the Omnisphere folder icon in drive H:\Spectrasonics\STEAM\

To clarify: The error message states:
"Unable to access plug-in folder at C:\ProgramData\Spectrasonics\STEAM\Omnisphere - check folder for permissions"

So "STEAM" in the file path refers to the shortcut and everything in the file path after it is located in the STEAM folder on drive (H). However, there is no plug-in folder there. The path to the plug-in folder is C:\ProgramData\Spectrasonics\plug-ins\64 bit
  Member 24.07.2014 150
+67
Not wishing to get involved in what 'optimum' permission settings should be,
have you tried... for your folder "H:\Spectrasonics\STEAM\Omnisphere"
granting 'full control' to user 'everyone'?
  Resident 20.12.2018 23 569
+4913
quote by adheesiveNot wishing to get involved in what 'optimum' permission settings should be,
have you tried... for your folder "H:\Spectrasonics\STEAM\Omnisphere"
granting 'full control' to user 'everyone'?


THAT should be the permission. Every Windows user ought to know that is the way to solve it.



quote by dim chandelier

I'm sure it's a simple fix but I've re-read the instructions several times and can't figure it out.

Do this to the Spectrasonics folder you have on H: drive.

Properties>Advance>Change Permissions>Add>principal:select a principal>Advanced>Find Now>Everyone>OK>Basic Permissions> Check them all
If it still doesnt work check permissions in the Spectrasonics folder on your ProgamData folder. You are almost there!
The problem is not the problem. The problem is your attitude about the problem.
Глаза боятся, а руки делают.
  Member 15.01.2016 23
+1
Windows 7 here. For full folder permissions I'm doing: Right click folder, Properties>Security>Advanced>Change Permissions>Full Control for all users. I 've done it for C:\ProgramData\Spectrasonics and made sure the subfolders have the correct settings. The same for H:\Spectrasonics. Still no luck.

I keep going back to the error message: "Unable to access plugin folder at C:\ProgramData\Spectrasonics\STEAM\Omnisphere." It refers to a plugin folder in the Omnisphere folder on (H) drive because everything from "STEAM" in the file path is on H drive (correct?). However, there is no folder named plugin, plugins, plug-in or plug-ins in that folder.

Also, when instructions say "Run Omnishpere as Administrator" I've been right clicking the standalone icon on my desktop and selecting "Run as Administrator".
  Member 4.01.2019 4
0
Thanks a lot Pirate..

I got the message. Waveforms couldnt be loaded! Under OSX!!
You guys know what I made wrong?
Trying to reinstall this gem and hope its gone by then.
<3
  Member 8.04.2019 1
0
quote by The Pirate
quote by papawiseoww! nice!, but who cracked this release?

This release is not cracked per se. It contains the original installers from Spectrasonics AND the registration is achieved thanks to R2R's 2048 Key Generator.


Hey, I'm not sure my pm went through so I'll ask here:

My omnisphere closed by itself when I pasted the response code. I assumed it worked (it didn't) so I procedded to patch it only to realise it wasnt working.

Is there any way to make it work at this point? Will it work if I uninstall omnisphere (and if so do I need to erase registry entries or something)?

P.S. this was my mistake, thank you very much for this release
  Resident 20.12.2018 23 569
+4913
quote by Socrates.
quote by The Pirate
<span class='QuoteBy'>quote by papawise</span>oww! nice!, but who cracked this release?

This release is not cracked per se. It contains the original installers from Spectrasonics AND the registration is achieved thanks to R2R's 2048 Key Generator.


Hey, I'm not sure my pm went through so I'll ask here:

My omnisphere closed by itself when I pasted the response code. I assumed it worked (it didn't) so I procedded to patch it only to realise it wasnt working.

Is there any way to make it work at this point? Will it work if I uninstall omnisphere (and if so do I need to erase registry entries or something)?

P.S. this was my mistake, thank you very much for this release


RETRACE your steps. Follow them and you shouldnt have problems.
The problem is not the problem. The problem is your attitude about the problem.
Глаза боятся, а руки делают.
  Resident 11.10.2014 37 90
+852
Thanks for ThePirate, & thanks to the "mac steps"

I loose my mind on Step 7. Installer found my Steam Folder, but i can't continue. Error message is :

Alert Failed to open output file.

Any suggestions?
  Member 17.08.2016 7
0
Thank you bro... Super
  Resident 3.01.2011 1 4434
+560
The Keygen dose Not Authorize For Me in Mac high Sierra 10.13.6
  Resident 26.07.2016 404
+88
Hi. If anyone knows (So Pirate doesn't have to answer everything)

Omni runs perfectly in windows 7 64 bit standalone. Haven't tried it yet inside a daw since i work mainlt with old air Nuendo 4 at 32 bits. This is the reason i left my previous 32 bit Omnisphere 1. The thing is, when i open omni 1 inside Nuendo, the plugin starts but the sounds (factory, user) have disappeared. Intead, it reads Omni 2 sounds which obviously can't be played. Any ideas how to fix this and get back omni 1 sounds?

Also, how can I check the integrity of a torrent using Pirate's supplied SHA 256? I want to do this to keep seeding...

Thank you all who are trying to make this monster work!
Cheers
If there's one thing you can say about mankind,
there's nothing kind about man.
  Resident 12.10.2018 319
+48
IIRC, 7zip has a function that will check that SHA. I usually right click the file and select CRC SHA.
  Resident 26.07.2016 404
+88
Thank you!
If there's one thing you can say about mankind,
there's nothing kind about man.
  Resident 12.10.2018 319
+48
Thanks to all the torrenters who actually committed to seeding. After a few miserable days of my WIFI adapter disconnecting constantly (and certainly could not D/L overnight), I had one good day of no disconnects and finished the D/L today! And as soon as the new Windows 10 compliant WiFi adapter arrives on Wednesday, this one's going into a dark hole somewhere. Will continue seeding.
  Member 9.04.2019 13
+1
7 zip saying error to me, if i want to extract the second folder (1-5).
  Member 17.12.2019 1 30
+7
Me too. Did you figure out how to solve?
  Resident 20.12.2018 23 569
+4913
quote by dim chandelierWindows 7 here. For full folder permissions I'm doing: Right click folder, Properties>Security>Advanced>Change Permissions>Full Control for all users. I 've done it for C:\ProgramData\Spectrasonics and made sure the subfolders have the correct settings. The same for H:\Spectrasonics. Still no luck.

I keep going back to the error message: "Unable to access plugin folder at C:\ProgramData\Spectrasonics\STEAM\Omnisphere." It refers to a plugin folder in the Omnisphere folder on (H) drive because everything from "STEAM" in the file path is on H drive (correct?). However, there is no folder named plugin, plugins, plug-in or plug-ins in that folder.

Also, when instructions say "Run Omnishpere as Administrator" I've been right clicking the standalone icon on my desktop and selecting "Run as Administrator".

My friend take a screenshot of your folder permissions and send it by PM. Dont worry. We are going to fix that %%^^&%&$&$
Just in case make sure the shorcut's name is STEAM ( delete the rest that says "- shortcut")
The problem is not the problem. The problem is your attitude about the problem.
Глаза боятся, а руки делают.
  Member 24.07.2014 150
+67
Please believe when I say it's not 'me' that's being fussy here
- it's Windows that is necessarily fussy.

So...

When you say you've set 'Full Control for all users'
I have to ask
- what users are in your list of users?
- and specifically is there an entry named 'everyone' in that list
If not then you should add that 'everyone' user group to the list.

Also, when you say
'and made sure the subfolders have the correct settings. The same for H:\Spectrasonics'
Does that mean you definitely set the permissions for the subfolder
H:\Spectrasonics\STEAM\Omnisphere

I sympathise with you re: ambiguities in error messages,
(especially where shortcuts are involved).
So,
"Unable to access plugin folder at C:\ProgramData\Spectrasonics\STEAM\Omnisphere."
My reading of this message is...
It's referring to the plugin's lack of access to folder H:\Spectrasonics\STEAM\Omnisphere
which it regards as being located at
C:\ProgramData\Spectrasonics\STEAM\Omnisphere
by virtue of accessing it via the 'STEAM' shortcut.
  Resident 20.12.2018 23 569
+4913
quote by adheesivePlease believe when I say it's not 'me' that's being fussy here
- it's Windows that is necessarily fussy.

My friend, when I said that I was talking specifically to the member I quoted who has his STEAM folder in his drive H:
If you read the instructions above your questions you will find the answer to the "Everyone" permission issue. You dont have to create a "Everyone" user. It is there. Look in alphabetical order. You simply grant full control to user "Everyone".
Problems with Omnisphere, Trilian and Keyscape access to STEAM are generally 3:
1) Wrong shortcut path to STEAM folder.
2) Incorrect shortcut name (it should be STEAM without the -shortcut suffix).
3) Folder permissions.



The problem is not the problem. The problem is your attitude about the problem.
Глаза боятся, а руки делают.
  Resident 20.12.2018 23 569
+4913
quote by kidinkbroo7 zip saying error to me, if i want to extract the second folder (1-5).

You need to be more specific
The problem is not the problem. The problem is your attitude about the problem.
Глаза боятся, а руки делают.
  Member 24.07.2014 150
+67
the Comment has been Removed
  Member 24.07.2014 150
+67
quote by The Pirate
<span class='QuoteBy'>quote by adheesive</span>Please believe when I say it's not 'me' that's being fussy here
- it's Windows that is necessarily fussy.

My friend, when I said that I was talking specifically to the member I quoted who has his STEAM folder in his drive H:
If you read the instructions above your questions you will find the answer to the "Everyone" permission issue. You dont have to create a "Everyone" user. It is there. Look in alphabetical order. You simply grant full control to user "Everyone".
Problems with Omnisphere, Trilian and Keyscape access to STEAM are generally 3:
1) Wrong shortcut path to STEAM folder.
2) Incorrect shortcut name (it should be STEAM without the -shortcut suffix).
3) Folder permissions.


Hi Pirate,

Actually I wasn't asking any questions. My post was a reply to that same member (dim chandelier) with his installation on drive H:
I was just trying to help him ensure that his permissions setup was appropriate. (Sometimes 'everyone' is not automatically in the users list, and he 'might be' facing that issue)
Sorry if it looked like I was replying to you and asking funny questions - I wasn't.

Maybe I'm doing something wrong when I add a reply to a message.
My message did originally appear 'in line' as a reply to his post (as intended) but then a few minutes later it somehow moved to the end of the list.

Same thing just happened again. I originally made this reply as a reply to your message; and it did appear 'in line as a reply; and then a few minutes later it got moved to the end of the list.

Cheers
  Member 15.07.2014 1 19
+34
the Comment has been Removed

related posts

Spectrasonics Omnisphere v2.8.3d WiN [MORiA]Spectrasonics Omnisphere v1.0 with ALL Updates (AIRISO)

Spread the Word