• Get the best VPN on the market with 66% Discount!
Software, Windows
Spectrasonics Omnisphere v2.8.3d WiN [MORiA] screenshot
MORiA | June, 26 | STANDALONE | VST | VST3 | AAX | 214.41 MB
Omnisphere 2.8 - Endless Possibilities Omnisphere® is the flagship synthesizer of Spectrasonics - an instrument of extraordinary power and versatility. Top Artists all over the world rely on Omnisphere as an essential source of sonic inspiration. This award-winning software brings many different types of synthesis together into one amazing-sounding instrument that will spark a lifetime of exploration.

Hardware Synth Integration
Omnisphere is the only software synth in the world to offer a Hardware Synth Integration feature. This remarkable innovation transforms over 65 well-known hardware synthesizers into extensive hands-on controllers that unlock Omnisphere’s newly expanded synthesis capabilities. Simply put, this ground-breaking feature makes using Omnisphere feel just like using a hardware synth! By bridging the physical experience gap between software and hardware, users gain intuitive control of Omnisphere by using the familiar layout of their supported hardware synth. Virtual instrument users can now experience the joy of the hardware synth workflow and hardware synth users can fully expand their capabilities into the vast sonic world of Omnisphere!

List of Supported Hardware

Greatly Enhanced Arpeggiator
• New Humanity and Life controls!
• New Presets Library
• New Strumming Modifiers
• Chord Voicings
• Pitch Slides
• Step Dividers
• Capture MIDI Files!

New Hardware Sound Library
Omnisphere includes a stunning new “Hardware Library” with over 1,600 new patches created by Eric Persing and the renowned Spectrasonics Sound Development team. Each hardware profile has a corresponding set of sounds in the Hardware Library which were specially designed using that hardware synth as an Omnisphere controller. These inspiring new sounds feature a wide range of categories and many have a distinctly ‘classic’ flavor! Notably, this update takes Eric’s classic sound design work from the original 1987 Roland D-50 into completely new sonic territory with Omnisphere’s vast synthesis capabilities. Best of all, the new sounds are available for ALL users, regardless of using the hardware or not!

Vastly Expanded Synthesis Engine
• Four Layers per patch!
• New State Variable Filters
• Over 500 DSP Wavetables
• Powerful Granular Synthesis
• 8 LFOs, 12 ENVs, 34 Filter Types per part
• Doubled Mod Matrix
• Full FX Modulation

Audio Import
You can use your own audio file as a soundsource in Omnisphere, simply by dragging it onto the interface! Go wild with using the new Granular Synthesis, Harmonia, Innerspace and many other creative tools inside Omnisphere!

High Resolution Interface
Omnisphere supports a newly redesigned, high resolution interface with support for HiDPI displays. The modernized GUI is now easier to use and resizable to fit comfortably into your workspace.

Includes over 14,000 sounds!
Since the beginning, Omnisphere has been the sonic weapon of choice for creative players and producers in search of next level sounds on hit records, bestselling games and Oscar-winning films. Omnisphere’s amazing sound library is constantly growing and being pushed in fresh directions by the award-winning Spectrasonics Sound Development Team.

58 FX Units

Additional Highlights
• Standalone Application now included
• Enhanced Orb interface with Attractor mode
• Satellite Instrument support for Trilian and Keyscape
-and more!

Sonic Extensions
A new brand of innovative products built by Spectrasonics, that introduce a completely new experience for Omnisphere by extending its capabilities with special features, effects and sounds. Find out more about the incredible Sonic Extensions at the special website!

How to install

- Install Omnisphere
- Replace Omnisphere.dll to VST FOLDER
- Replace & Omnisphere.vst3 to VST3 FOLDER

For Application
- To get STANDALONE workin'
Go to
C:\ProgramData\Spectrasonics\plug-ins\64bit
- Replace Omnisphere.dll and Omnisphere.vst3

For Pro Tools Users
- To get AAX workin'
Go to
C:\ProgramData\Spectrasonics\plug-ins\64bit
- Replace Omnisphere.dll and Omnisphere.vst3

Done.


^
____.-===/// \\\===-.____

This release has been exclusively provided to AudioZ

_====-----====_
*



download from free file storage
click to show download links

Added Patch. MORiA

download from any file hoster with just one LinkSnappy account
download from more than 100 file hosters at once with LinkSnappy.

comments

  Member 11.01.2014 110
+9
.......
  Member 10.05.2021 4
+1
I dont Belieeeeve it. I was just going to update Omnisphere and thought I'd check to see if there were any new updates since the last R2R and Low and behold MORiA has fixed one.

Thanks MORiA - will give it a go
  Resident 8.10.2009 3 365
+57
Thanks Moria...
  Member 2.02.2014 2 75
+8
Does anyone have the change log for this update?
What is different from 2.7?
Drugs / Rock n Roll /Bad Ass Vega Whores / Late Night Booty Calls / Shiny Disco Balls
  Resident 18.10.2012 1 327
+217
Omnisphere 2 Software 2.8.3d
4-26-22
Fixes host automation issues with Logic Pro 10.7.3 on Intel Macs (or M1 Macs running Logic Pro via Rosetta translation)
Fixes Logic Pro automation ID sorting issue on M1 Macs (Apple Silicon)
Fixes issue where FX rack bypass LED (tiny red/blue button) was sometimes not in-sync with full-rack GUI bypass graphic
Fixes audio and GUI glitches that could occur when automating a Custom Control
Fixes crash on Windows when user creates a browser project with a name starting with -G, -B, -I, -C
Fixes issue where MIDI Polyphonic Aftertouch did not work with VST3 plugin; also fixes issue where Polyphonic Aftertouch sometimes did not work with VST2 or AU plugins
Fixes issue where the Startup Directory "Auto Recall" feature did not work for SE or User Directories
Fixes potential issues with selecting entries in popup menus
VST3: Fixes issue in Cubase where the Camera icon and Quick Controls button were not displayed in Cubase's plugin header
VST3: Fixes issue on Windows where "Get Updates" button did not link to the Smart Update webpage
  Resident 18.10.2012 1 327
+217
Omnisphere 2 Software 2.8.2c
12-8-21
Fixes issue where Ableton Live Rack presets saved with Custom Controls patches did not display the Custom Controls page when reloaded
Fixes issue where the Modulation Target Parameter sliders did not function correctly
Fixes issue where the On/Off buttons on Granular Zoom pane could sometimes show the wrong state after clicking on it
Fixes issue where the Orb Dice button could sometimes display the incorrect highlight state
Fixes issue where the Orb did not record as long as expected in Motion mode
Fixes issue where the Layer solo on/off indicators were not properly updated after loading a patch
Fixes issue where Attack, Decay, and Release Envelope parameters read from existing patches were limited to 20 seconds
Fixes issue where the "Realism" control in Keyscape Factory patches could freeze the GUI temporarily
Fixes crash that could occur when rapidly changing patches with Custom Controls
Fixes issue where Soundsource version numbers for Satellite instruments were not displayed on the splash pane
Windows only: Fixes issue where playing MIDI notes while a Soundsource is loading could cause CPU spikes and audio glitches
Windows only: Fixes issue where playing a Soundsource with Thinning enabled could cause CPU spikes and audio glitches
VST3: Fixes issue where loading a VST3 preset from a Host could cause incorrect info to be displayed on the GUI
VST3: Fixes issue where creating new parameter automation assignments did not work in REAPER and Bitwig Studio
Omnisphere 2 Software 2.8.1c
11-2-21
Fixes graphics performance issues on macOS Monterey
Fixes issue where Logic Pro did not register the correct Multi-Output bus configuration for the AU plugin
Fixes issue where loading VST2 or VST3 presets from a Host could cause incorrect Patch info to be displayed on the GUI
Fixes issue where the Synth Wavetables menu could display an empty "Sonic Extensions" menu for "FX Only" SE installations
Omnisphere 2 Software 2.8.0d
10-19-21
Sonic Extensions compatibility
New Arpeggiator features:
- New “Strum” step modifiers simulate guitar strumming. Specially featured in the “Nylon Sky” Sonic Extension, these modifiers can be used in any patch in Omnisphere
- New "Humanity" knob controls the amount of randomization applied to individual note start times
- New "Life" knob controls the amount of randomization applied to individual note velocities
New Modulation Targets: Arp Humanity and Arp Life
Adds value-snapping detents for the Envelope ADR parameters on the Layer Pages and Custom Controls. Detents are only added when the Envelopes are host-synced. Holding down Shift while dragging the ADR controls allows continuous value adjustments
Fixes issue where the Harmonia Mix parameter value could be wrong after loading a patch
Fixes issue in Shared Signal Path mode where disabling Layer A could create clicking noises in audio from Layers B-D
Fixes zippering artifacts for the Aux Return parameter on the Part Effect Racks
Fixes issue where simultaneously changing the Soundsource "Reverse" parameter for 2 or more layers could cause loading failures
Fixes issue in Shared Signal Path mode where disabling Layer A caused the Ring Mod effect to sound incorrect on Layers B/C/D
Fixes issue where Key Tracking and other sources would not work when Solo mode is On
Fixes issue where Filter Key Tracking in Solo mode did not handle release events properly
Fixes issue where changing the Master Filter cutoff and resonance simultaneously could corrupt the audio output
Fixes issue where the Master Filter was adding audible lowpass filtering at host sample rates above 44.1kHz
Fixes issue where LFO rate was incorrect after changing the sample rate
Fixes issue where envelope parameter data was loaded incorrectly for some patches
Fixes issue in Arpeggiator where Step Dividers, in conjunction with Chord mode, did not play properly
Fixes issues with Arpeggiator preset menu
Fixes crash in Live Mode pane that could occur when rearranging Parts
Fixes crash that could occur when a Soundsource started playing for the first time
Fixes Patch Browser synchronization issue where the Category filter could be incorrectly reset to "All" while changing patches
Fixes issue in Browsers where exiting Sound Match mode did not return to correct prior patch library
Fixes issue where the wrong Mini-Browser could sometimes be shown after closing the full multi-browser
Fixes issue where Browser’s rating stars could be overwritten by “MIDI Learn” text sometimes
Fixes issue where switching patches could cause audio glitches
Fixes issue where arrow steppers on mini browser pane could step thru patches when mini multi browser was displayed
Fixes issue where note timing adjustments made to the Trigger Mode setting were incorrectly scaled by the Clock Speed parameter
Fixes issue where setting polyphony (# voices) to 64 could cause the plugin to stop responding to Note On events
Fixes issue where modulation highlight graphics for GUI controls did not always get reset after a patch load
VST3: Fixes issue where "Enter Value" feature for manually typing in automation values did not work
VST3: Fixes issue where host automation values changed after closing/opening the GUI
VST3: Fixes issue where VST3 Hosts added a resizing handle to the VST3 plugin GUI
VST3: Fixes issue where changing the Clock Speed parameter did not work properly
Mac Only: Fixes issue where modulation highlight images were not getting drawn for some knob-style controls
Windows Only: Fixes graphics rendering issues for images displayed on the Custom Pane
Windows Only: Omnisphere Standalone app updated to v1.1.0d. Resolves Windows system DLL loading issue
  Member 27.10.2015 1 384
+151
With all those amazing changes I don´t know why it´s not Omnisphere 3.0.
  Member 21.03.2021 70
+16
quote by wuzzleOmnisphere 2 Software 2.8.3d
4-26-22
Fixes host automation issues with Logic Pro 10.7.3 on Intel Macs (or M1 Macs running Logic Pro via Rosetta translation)
Fixes Logic Pro automation ID sorting issue on M1 Macs (Apple Silicon)
Fixes issue where FX rack bypass LED (tiny red/blue button) was sometimes not in-sync with full-rack GUI bypass graphic
Fixes audio and GUI glitches that could occur when automating a Custom Control
Fixes crash on Windows when user creates a browser project with a name starting with -G, -B, -I, -C
Fixes issue where MIDI Polyphonic Aftertouch did not work with VST3 plugin; also fixes issue where Polyphonic Aftertouch sometimes did not work with VST2 or AU plugins
Fixes issue where the Startup Directory "Auto Recall" feature did not work for SE or User Directories
Fixes potential issues with selecting entries in popup menus
VST3: Fixes issue in Cubase where the Camera icon and Quick Controls button were not displayed in Cubase's plugin header
VST3: Fixes issue on Windows where "Get Updates" button did not link to the Smart Update webpage


These changes are only fixes.
In an update to v3 some big features will be added and maybe they will change the GUI.
Account owner is dead (moderators please delete account)
  Member 24.10.2021 3 158
+129
Sigh. I wish they'd say this is an update and not the whole program. I was hoping it was because I have no need for 100GB of samples when only the synth engine will do.
  Resident 18.10.2012 1 327
+217
It's never been distributed without the 'samples' as even the synth engine relies upon samples for waveforms for the most part. The basic analog stuff is just that, basic. You could swap any other of the available synths and have a lot more functionality. Omnisphere's strength are the samples.
  Member 27.04.2022 362
+47
Really?
Thats interesting.
I like my samples drum machine or Kontakt based.

I DO like a synth with waveform ability,
but not more then about 500 megs of wavetables.
Just to add to the synth generating abilities.

I leave out ALL WAVE files above a meg,
out of any synth I have that uses them.
And the limit for all of them is less then a gig.

Of course I've got 100 gigs of Kontakt expansions.
Where something like that belongs.
  Resident 18.08.2018 445
+139
For me Omnisphere is a 180 GB Rompler (using Keyscape and Trillian as expansions plus some 3rd party)
There's no real replacement for Omni because of the sound designers, imo. Kontakt is different.
  Member 3.11.2021 5
+1
Why is it so hard to find a download for this library?
  Resident 18.10.2012 1 327
+217
Unsure if the links are live still at this point but there's at least one on site. and other places like ru torrents
  Member 3.11.2020 43
+2
What do you by 'download for this library?' Do you mean original installation file?
  Member 25.10.2019 442
+118
and once you have the library make copies on all external ssd/hdd´s for safety.

i have Omnisphere, Falcon, Kontakt, Nexus 3, Addictive Drums and some other libraries on two external 5GB and two internal Drives just to be safe if something bad happens.
  Member 20.07.2013 6 223
+293
Do you have to have other prior versions installed before this to work?
  Member 4.10.2014 220
+67
Nope.

As long as you have a version of this already, you don't need to have all of the prior updates before installing this.
https://soundcloud.com/parasiteuk
  Resident 18.08.2018 445
+139
I installed on top of 2.8.2c R2R So good so far
Thanks MORiA
  Resident 26.08.2017 1 570
+132
Thank You. That's exactly what I needed to know
  Member 14.01.2022 2 67
+29
Can i install this over my v2.8.1??
  Member 4.10.2014 220
+67
Yep. Just go through installing process and this update will be all good.
https://soundcloud.com/parasiteuk
  Member 21.03.2021 70
+16
It says STEAM folder not found!
But there is no STEAM folder in ProgramData\Spectrasonics.

I am installing this first time. Is this only an update?
Account owner is dead (moderators please delete account)
  Resident 30.01.2010 1 1661
+277
you need have full librarys installed Steam folder ! this alone wont do
***MSJ=X***
(Retired)
  Member 21.03.2021 70
+16
where can i get that?
Account owner is dead (moderators please delete account)
  Resident 30.01.2010 1 1661
+277
the Comment has been Removed
***MSJ=X***
(Retired)
  Member 20.03.2017 65
+6
Thanks for sharing this update! But have been racking my brains on how to install over the 2.8.2 version from R2R with no success so far. Just a bit confusing for an old guy!
If somebody could explain how to do this would be much appreciated.
  Member 15.10.2017 1374
+518
Did you see the information above?
(Yes I know it seems crazy that there is not one piece of info in the actual download, but that is Moria's choice)
~~~~~~~~~~~~~~~~~~~~~~~~~~~
SymlinkTool: LSE - Firewall Control: WFC
  Member 28.06.2022 17
+40
So there won't be a problem if I have a R2R version of Omni 2.5 and then I install this MORUA version just following those instructions?
  Member 8.09.2020 88
+11
You are amazing! Thanks for this post mate!

related posts

Spectrasonics Omnisphere 2.6 Complete WIN\MACSpectrasonics Omnisphere v1.0 with ALL Updates (AIRISO)

Spread the Word