you can now donate with bitcoin or your bank card by clicking the piggy icon under the logo

  • Get the best VPN on the market with 66% Discount!
Software » Windows
Three-Body Technology - Kirchhoff-EQ v. 1.5 WiN [MOCHA] screenshot
AudioZ Exclusive | VST3 / VST2 | 119 MB

Kirchhoff-EQ is an ultimate 32-band parametric EQ plugin built for all critical professional applications. It has refined sound quality, analogue-matched curves, 15 filter types with continuously variable shape and 32 vintage EQ types modeled from real-world devices. The builtin dynamic processing functions are highly flexible and have ultra-low distorion. All these push Kirchhoff-EQ to a next-generation standard.

Equalizers will never be the same again.

Three-Body Technology - Kirchhoff-EQ v. 1.5 WiN [MOCHA] screenshot

Ultimate Sound Quality

▬ Robust Nyquist-matched Transform

Through originally developed "Robust Nyquist-matched Transform", Kirchhoff-EQ has made digital-domain frequency response more approximate to its analogue counterparts without high frequency cramping as in regular IIR (infinite impulse response) equalizers. This technique is applied on all filter types in Kirchhoff-EQ.

▬ High-Precision Processing

64-bits is mandatory and it's not negotiable. The internal processing of Kirchhoff-EQ is always in 64-bits (or 117-bits), regardless of host DAW's current working precision.
Psychoacoustic Adaptive Filter Topologies

All linear filter structures should have the same sound on paper. However in real-world application, round-off errors make every filter structure sound differently: some better in low frequencies, some better in high frequencies.

A technology called "Psychoacoustic Adaptive Filter Topologies" has been deployed in Kirchhoff-EQ. Filter structures change themselves to a "best fitting" state along with corresponding band frequency changes, resulting in optimized sound quality in both low and high frequencies.

▬ Switchable Ultra-High 117-bits Processing

Since there's already 64-bits, why not go further? Kirchhoff-EQ uses a technique called "Double-Double" to make precision of internal processing reach 117 bits! This is the first equalizer in the world to reach such precision. You can switch between 64-bits and 117-bits at any time. It satisfies the most demanding ears.

* Linear-phase mode always uses 64-bits as it is an FIR(finite impulse response) filter, and does not support 117-bits.

▬ Filter Types
15 Unique Filter Types

low pass, high pass, band pass: continuously variable from 0 dB/oct to 96 dB/oct;
bell, notch: continuously variable from 12 dB/oct to 96 dB/oct;
low shelf, high shelf, tilt shelf: continuously variable from 6 dB/oct to 96 dB/oct;
flat tilt and flat top;
sword: has sharper slope than bell, specifically designed to "dig" out resonances.
brickwall low pass, brickwall high pass, allpass low and allpass high.

▬ Continuously variable slopes Filters

The slope of most filter types can be continuously changed from 0 dB/oct, 6 dB/oct or 12 dB/oct up to 96 dB/oct. Would you like to try a 8.125 dB/oct highpass?

32 Filter Types Modeled from Historic Vintage EQs!

Get vintage and modern at same time! We modeled 9 vintage EQ hardware units as a total of 32 EQ types implemented in Kirchhoff-EQ. Benefit from Robust Nyquist-Matched Transform, every EQ type precisely matches the original hardware and won't cramp near Nyquist frequency. For a further step, unlike the original hardware that only allows to choose between several frequency positions, we modified the DSP model to make adjustable frequency points for all these types! Every type in these models can be used together with regular EQ types or other modeled types, and can be applied with dynamic functions (except lowpass and highpass types). This brings you more freedom and convenient operations.

* No non-linear behaviors were modeled. All vintage filter types only contain ideal linear parts of their physical model.

▬ Zero-Latency/Analogue/Linear/Mixed Phase Modes

The phase mode of Kirchhoff-EQ is switchable between zero-latency mode, analogue mode, linear phase mode and mixed phase mode, in order to meet all your phase relationship needs.

* No matter which phase mode currently in, if dynamic functions is turned on for a filter band, it will work on minimum-phase mode (won't affect other bands).

▬ Mixed Phase Mode

The zero-latency and linear phase modes have a very different sound. Kirchhoff-EQ provides a mixed mode that uses zero-latency when the band frequency point is low, and uses linear phase when it is high. Each band could be changed smoothly between minimum and linear phase mode according to their frequency.

* There is no noticeable crossover between filter types while in mixed phase mode, transition is seamless.

▬ Flexible Dynamic EQ Functions

Dynamic functions in Kirchhoff-EQ are not just a bonus, they provide the richest functions you have ever seen. Enabling you to achieve unlimited possibilities of dynamic EQ functions. All filter types (except low/high pass, band pass and notch), even these vintage-modeled ones, can be applied with dynamic functions.

▬ Harmonic Shifted Envelope

All dynamic EQ have odd- and non-integral harmonics, that’s the laws of physics. By using advanced DSP techniques, Kirchhoff-EQ now "shifts" most energy of odd-harmonics into even-harmonics, creating an ultra-low noise floor and enhanced sound. Now you can use dynamic functions with freedom without worrying about smashing your sounds.

▬ Two-Way Threshold

You can now control how dynamics react to the portion of the signal above/below threshold concurrently. In Kirchhoff-EQ, the "Above" stage works as a compressor or upward-expander, and the "Below" stage works as an expander or upward-compressor. For example, you can raise the signal below the threshold AND compress the signal above the threshold to "stabilize" a band.

▬ Detect/Relative Envelope Detection

Let us imagine a simple case: we are playing an audio clip in which sounds around 1khz are 9 dB. You may think "The 1khz range is over powering, We should reduce at 1khz." But we should also consider the overall level. If the whole audio is 30 dB, you would not feel that 1khz is too much, instead you may feel it's not enough. The better criteria to determine whether a band's volume is high or low is its relative portion in overall volume envelope, instead of only its absolute dB value.

Thereby we introduce "Detect/Relative Envelope Detection" in Kirchhoff-EQ. The dynamics are affected by both current frequency band and relative portion to a "Relative" band. The contribution of Relative Envelope Detection to dynamics is also adjustable: when set to 0%, it degrades as a normal dynamic EQ; and when set to 100%, the amount of dynamics is fully calculated from the relative portion.

The “detect” band is set according to the frequency and Q of the band by default, “Relative” is the whole audio envelope by default. But they can be set freely.

The detecting band and relative band have a freely adjustable frequency point and Q value. Or enable “S.C.” mode to use “Detect” or “Relative” with a sidechain signal.

▬ Onsets Detection Mix

By turning on "Onsets" mix, the envelope detector reacts more specifically to transients inside of the envelope. So you can fine-tune the tone of transients. For better adjustability, you can "mix" envelope detector and onsets detector. For example, you can compress the high frequencies just a little bit whilst compressing the sudden increase of high frequencies more aggressively.

Three-Body Technology - Kirchhoff-EQ v. 1.5 WiN [MOCHA] screenshot

Special thanks to anonymous who provided with a license

____.-===/// \\\===-.____

This release has been exclusively provided to AudioZ

download from free file storage
click to show download links

New links with right size. Olymoon

download from any file hoster with just one LinkSnappy account
download from more than 100 file hosters at once with LinkSnappy.


  Member 24.11.2014 9
Didn't expect too see this. Thanks MOCHA and Oly.
  Member 11.09.2022 2
Holy Sh*t. Big thanks Mocha and Olymoon
  Moderator 21.01.2012 1850 14269
Thanks for your good words. But remember that this is only possible
thanks to anonymous provider
  Member 9.03.2015 90
This one replaced Fabfilter within a week of using it. Can't recommend this EQ enough to have.
  Member 24.10.2021 1 54
Oh, wow. This is a surprise. I keep on reading how this IS the one ring, er, EQ, to rule them all. Would my peasant ears be able to tell the difference between this and, say, Guilfoss, Pro-Q or Weiss? Nope. I can only dream.
  Resident 18.12.2015 201
I too have read something along those lines, but I'm yet to give it a go. Is it possible the reason you cant tell the difference because you just haven't unlocked it's true potential yet?
  Resident 5.06.2020 7 210
Yeah, this one is a beast. Pro-Q next to this one can be regarded as minimalistic. This thing really is packed with everything you can and cannot imagine. It's that good. But, it's also very expensive :(
  Resident 26.09.2012 3 1622
Please support the developers if you like the plugin. It's mainly one person.
  Moderator 21.01.2012 1850 14269
Add that it's relatively soft on CPU ..
  Member 20.03.2020 1 143
Awesome release guys. Truly grateful! No AAX in this release? Or 12.5 PT AU is too old and no more supported on this new softwares?
  Member 15.07.2016 15
  Member 28.12.2016 166
THE DAY, has come! Thank you!!
  Member 3.08.2015 155
No way!! Thank you MOCHA and Olymoon!
  Resident 30.12.2017 1 1633
This is a really big one, congratulations to everyone involved.
  Member 14.12.2020 1 64
the Comment has been Removed
  Member 1.02.2014 121
use vst2 axx wrapper, it works in pro tools 12.5
  Member 30.11.2020 25 1175
Weird that it is audibly better sounding than Pro-Q3 especially on low end if you know what you are doing. Figured that it has "tight low-end" setting on by default, need to learn more about that.

Pro-Q3 auto setting on dynamic mode is hard to beat even this has more manual controls. Sometimes we want something quicker.

How to make the fonts bigger ?
people do become slaves to their own easiest techniques
  Member 24.04.2022 1
Amazing release, thank you
  Member 22.10.2021 32
1 Word: WOW!!!!!!!!!!

MOCHA made my week
  Member 25.03.2014 7 776
Thanks....this EQ looks very good, sorry for missing a little on mouse point
  Resident 8.03.2014 7 330
My new eq bb fabfilter
  Resident 30.01.2014 7 1978
Wow, thanks a lot to the suppliert and Mocha for this release!

Is it comatible with Ableton Live 11 R2R (newest version)?

I can't register Live and get an error by the way. Can anyone help?
I get an error saying "this licence is not valid for this computer".

Anyone any idea or had the same problem and managed to fix it?

Drop me a PM please!
  Resident 28.06.2022 22 34
read _mocha.txt
Sempak bolong! Gondal gandul...
  Resident 27.05.2022 10 75
Ayyyyyy! Nice! This is one of the main 2 or 3 plugins i've been anticipating for a while. Thanks
  Member 2.09.2022 12
OMG! I was waiting for this for so long! Thank you!
  Member 13.02.2014 1 114
even though I use PT, I'm still taking the opportunity to get this one, thanks provider and Oly
  Resident 1.07.2014 1 71
mantap mocha, salam gondal gandul
  Resident 26.01.2018 173
WOW .. its THE! EQ! Right?
  Resident 5.07.2016 19
i believe that after using this EQ personally, most people will get a consensus: ProQ is no longer a RULE, and Fabfilter is no longer a KING.
if you can, please support the developers as possible! buy this EQ, because it that will be used in each your channel
  Resident 5.06.2020 7 210
Yeah. Also, to anyone reading, the demo version of this plugin has ALL the features, unlimited time and no weird noise/FXs. Only has save project option deactivated. So you can use it all you want and just resample the results, it's fully functional, so I respect them for that.

Spread the Word