Thimeo Stereo Tool 9.91

P2P | 06.2022 | 31 MB
Stereo tool is a software-based audio processor which offers outstanding audio quality and comes with many unique features. It is used by over 1500 FM stations ranging from small local stations to 50-100 kW stations and nation-wide networks with dozens of transmitters, thousands of streaming stations and many DAB+, HD, AM and TV stations. It can be used for both live and file based processing.

Stereo Tool can make recordings sound equal and consistent in volume and sound color, bring out the details, and increase existing stereo effects. It can repair 'broken' stereo images which often occur on cassette tapes, vinyl and cheap CD's, which normally causes havoc when playing it on a mono system, headphones or a system which includes a stereo widener.

Special support (not free) is included for radio stations: Much louder output levels, FM pre-emphasis, stereo coding and RDS coding for FM stations, and protection of highs against distortion caused by lossy compression for web radio stations. The processing latency can be reduced as low as 12 ms, at the cost of reduced fidelity. At the maximum quality the processing latency is 93 ms.

Winamp plug-in version
Intended for Winamp, SAM Broadcaster, RadioBOSS, MediaMonkey, AIMP and other applications that support Winamp DSP plug-ins.

Stand alone version
Sound card input to sound card output. Intended mainly for FM radio stations which process external (live) feeds.

Features:

Declipper:
- Repairs clipped audio
- Removes distortion, restores dynamics
- Also used by police forensics labs

Delossifier:
Improves the sound of MPEG2/MP3 style lossy compressed files

Dehummer:
Removes unwanted constant sounds, such as a 50/60 Hz hum from bad cables

Spectrum control:
Non-compressing spectrum equalization

Compressors:
- Wideband AGC
- Two multiband compressors, 2-9 bands
- Wideband compressor
- Low level boost for classical music

Stereo widening:
Choice of multiple stereo wideners

Loud & clean!:
Upto 140% audio level at 100% modulation
Gives 2-3 dB extra headroom for highs
Be the loudest and cleanest station on the dial!

Multipath:
Controls RF bandwidth to avoid reception problems
Compatible with all receivers
Stations report upto 30 km bigger reception area

Stereo / rds:
Built-in stereo and RDS encoder
RT+ and remote control support

Standalone only

home page

https://www.stereotool.com/

download from free file storage

download from any file hoster with just one LinkSnappy account

download from more than 100 file hosters at once with LinkSnappy.

comments

hidera	status	registered	posts	comments	rating
hidera	Contributor	11.10.2014	6565	13658	+271801

Rapidgator | KatFile | Nitroflare

mirror

http://peeplink.in/896cc846d8c9

10.06.22 @ 21:45

HATSHEPSUT	status	registered	posts	comments	rating
HATSHEPSUT	Member	21.06.2018	16	8915	+1204

Rapidgator | KatFile

mirror

https://peeplink.in/47e0e24b45fb

10.06.22 @ 22:22

korgrog	status	registered	posts	comments	rating
korgrog	Resident	2.09.2011	1	561	+161

Mordi

Thanks

always interesting stuff

giving it a try to see how well it balances out audio at different levels ,for Dj use, hope it will fix the need for level adjustment

10.06.22 @ 22:18

FinalMaster	status	registered	comments	rating
FinalMaster	Member	21.12.2018	518	+385

2022/06/10 v9.91
ITU1770 meter now also shows multiple time intervals (Immediate, 3, 10 and 30 seconds).
GUI: Disabled Lowpass slider if it's inactive (no streaming output, and FM/AM lowpass filtering is in use).
Workaround added for OBS (Stereo Tool running as a plugin in OBS could cause it to crash after loading/saving presets).
Bug fix: Plugin versions tried to open an input sound card in version 9.90. This could cause an error to be reported.
Bug fix: Delossifier highs behavior was inverted in version 9.90 (what happened was the opposite of what the setting said).
Bug fix: Window title wasn't always correctly set in version 9.90.
Bug fix: Bass Exciter didn't work properly with Delossifier Spectral Hole Filler enabled.
Bug fix: DeReverb was not disabled by pressing "Disable unlicensed features".
Bug fix: Linux version: The file save dialog could write 1 byte outside of memory (doesn't seem to have caused any problems).
Optimized opening of multiple web interfaces (that could cause some unrelated things to be restarted).
Updated presets.
Linux Enterprise build added.
macOS Enterprise build added (without native GUI for now, use the web GUI instead).

10.06.22 @ 23:12

rikyjacho	status	registered	comments	rating
rikyjacho	Member	4.04.2015	154	+27

the bass and highs exiter + delossifier bug is absolutely annoying in version 9.90, hopefully a vst version of this one will come soon...

25.07.22 @ 09:37

dabithamid	status	registered	comments	rating
dabithamid	Member	6.09.2016	8	0

please add winamp DSP

14.06.22 @ 17:23

waichwaich	status	registered	posts	comments	rating
waichwaich	Resident	11.08.2012	15	216	+340

Grab the official VST here or here and apply the patch ;) and use the keygen to generate a license if ST was not previously registered

Edit: nope, my suggestion does not work, every time the plugin is instantiated the licence is invalidated by calling home (http://vvv.stereotool.com/cgi-bin/[email protected]), even if Internet is off

Edit 2: I've patched the VST2 dll a second time, and now for some reason it works, the dll does not call home anymore...

Edits' conclusion: you have to path the dll twice! Indeed the first pass patches one spot in the dll, and the second pass patches another spot. Weird but that's how it is!

20.06.22 @ 05:29