please read the rules, it will answer all your questions!

  • Get the best VPN on the market with 66% Discount!
Samples, Kontakt
Native Instruments Kontakt Factory Library 2 v1.0.4 KONTAKT ISO screenshot
Audioz | 1 October 2022 | 36.68 GB
For 20 years, KONTAKT has been the backbone of countless film scores and pop hits, as well as thousands of incredible instruments from NI and your favorite NKS developers alike. Now, with a new HiDPI browsing experience, an overhauled Factory Library, new creative effects, and under-the-hood audio improvements, the next evolution is nearly here.



Thanks to Frozy and bobdule for the supply




download from free file storage
click to show download links


Upaded to FULL v1.0.4. hidera

download from any file hoster with just one LinkSnappy account
download from more than 100 file hosters at once with LinkSnappy.

comments

  Resident 17.06.2016 1 596
+565
there is something strange. or a bug

<HU><JDX> are not the same from Add Lib
than from the setup install drive C

i checked to relock drive C from lib tool. it fail
once corrected it works.
  Member 19.08.2021 215
+33
M1 Monterey 12.6 here. Installed normally, didn't have any issues with "The instrument belongs to a library that is not installed currently" error.
Note, this overwrites Kontakt Factory Library v1 so the Factory Library doesn't show anymore in Kontakt 6.7.1.
However, it is working perfectly with Kontakt 7, showing as Kontakt Factory Library 2. Opens in both Standalone and plugin Kontakt. Everything works as it should, sounds great and UI looks refreshing. All previews are working, too.
Thanks Frozy and bobdule!
  Member 5.01.2014 1 623
+144
Tried everything suggested here but to no avail.

Please supply the fix.

Mal
  Member 16.01.2022 46
+5
It's hard to help, without any Information.
Which OS?
Which Kontakt Release?
How did you add/Install the Library?
  Member 5.01.2014 1 623
+144
I'm on Win 10 Deathrow. I've used Bob Dules Kontakt 7 and installed the Factory Library to another internal drive. Added the Library and it's registered. I've tried all suggestions here but still get the dreaded 'not installed' message.

Mal
  Banned 4.06.2022 105 757
+9637
C:\Program Files\Common Files\Native Instruments\Service Center\Kontakt Factory Library 2.xml

=

C:\ProgramData\Native Instruments\Installer Log\Kontakt Factory Library 2 1.0.4.1 Setup PC Log.ini

=
HKEY_LOCAL_MACHINE\SOFTWARE\Native Instruments\Kontakt Factory Library 2\

Make all 3 populated with the same HU and JDX.

SOFTWARE\Native Instruments\Kontakt Factory Library 2\ContentVersion=1.0.4

SOFTWARE\Native Instruments\Kontakt Factory Library 2\HU=B912447ABDAED32DA2290A518813BB32

SOFTWARE\Native Instruments\Kontakt Factory Library 2\JDX=363F9CF471EB332719F296BD130100E60B72592BF1DA4B869A74DCD650FF5BF5

SOFTWARE\Native Instruments\Kontakt Factory Library 2\Visibility=3


If you tried it close to when I wrote the comment, try again. I edited it. Then I copied/pasted both of them to my registry to test to make sure it is good for you all. It is.
  Member 5.01.2014 1 623
+144
Is that for default primary drive, or does it not matter?
Mal
  Resident 26.08.2013 807
+132
Thanks for this info it work perfect. It let me move my library.
  Member 16.01.2022 46
+5
1. Uninstall the Libray with official uninstaller and delete the old Library Folder if there
2. Delete Kontakt Factory Library 2.xml from C:\Program Files\Common Files\Native Instruments\Service Center if there
3. Delete Registry Folder HKEY_LOCAL_MACHINE\SOFTWARE\Native Instruments\Kontakt Factory Library 2 if there
4. Delete C:\ProgramData\Native Instruments\Installer Log\Kontakt Factory Library 2 1.0.4.1 Setup PC Log xxx.ini if there
5. Restart Computer
6. Start Kontakt for refreshing Database
7. Close Kontakt 7
8. Install the Library with the Setup.exe to the Place you want, after this don't use R2R Manager or Kontakt Tool from Bob....
9. Start Kontakt 7 and try...

I'm on Win11 and use Bobs Release, no Problems so far,
  Member 5.01.2014 1 623
+144
Thanks, finally worked. Bob's new nicnt did the trick too.

Thank you very much, really appreciated.

Mal
  Resident 17.06.2016 1 596
+565
from testing...
add library tool is shitty
also the R2R kontakt manager
that break the good <HU><JDX> comming from the setup install.

but in fact the setup extracted nicnt need to be corrected.
it look like a Ni joke.

the GOOD NICNT to change
it will go faster. you can also do it yourself with notepad.

the original installer nicnt is BAD.
it need to be FIXED in the next update as usual with Ni.
  Banned 4.06.2022 105 757
+9637
Or maybe vice-versa - the .ini is "bad." I am gonna try some things.

Well, I just tried with everything set to the original .nict values and that did not work at all. It needs as I wrote above, and both .nicnt files work equally the same, then. So your conclusion seems to be the correct one.

Even more strange, when I put your .nict that seems to be correct, I don't get the wallpaper. It probably is a caching issue and a restart fixes or something.


--- After signing out of WIndows and back in, still blank wallpaper. Ni is strange with this. heh Screenshot

The bad .nict fixes it, lol. Instruments load well in either case, as long as info is set as I said above. - And now, switching back and forth, wallpaper shows for both. It's only some cache issue, I am fairly sure.
  Resident 17.06.2016 1 596
+565
the other joke is Kontakt integration in komplete kontrol.

the previews open 6.7.1when installed, not 7 directlly.
it need to load the VST3 & drag and drop the presets.

maybe a new version will be done before we have to hack it.
  Member 16.01.2021 2 16
+41
To me this exact thing happened when my Kontakt 7 VST3 file was not installed to the default VST3 folder. (In my case I used subfolders within the VST3 folder named after vendors.) Komplete Kontrol still listed Kontakt 7 in the list of plugins in the preferences dialog, but when trying to actually load a Kontakt instrument preset, it fell back to the VST2 version of Kontakt 6. After reinstalling Kontakt 7 to the default VST3 folder directly, all is working out just fine. Strange though...
  Member 19.07.2021 47
+6
thank so much for bobdule for fix this and worked perfectly!! minor issue but how did you fixed wallapepr..? cuz Im very a e s t h e t i c person so, can't live without single wallpaper in my libs.

(using mac m1 air monetery btw)

edit) figured it !!!

0. make sure save copy original .nicnt somewhere else,
1. and replace .nicnt with fixed GOOD NICNT (as bob said) inside the library.
2. open up Konakt (it will work but with no wallpaper)
3. THEN, bring back the copy of original .nicnt you saved, and replaced the fixed GOOD .nicnt you just worked
boom thanks again for bob
  Member 21.09.2015 173
+11
I did it as you said @dkdrlahEL, but it's not working for me, same message (instrument not installed properly).
I am on Win10, bobdule Kontakt 7.0.11 R3.
I manually extracted (all pkg files), complete library (I used 7z for this), and copy to disk D:\NI_Libraries\
I used manager library tool (from bobdule for v.7), to add library.
I correctly see it (all instruments) in Kontakt, but I can't open any instrument.
All time same message "instrument belonging to library not installed properly".
Did I make mistake that I did not use the installer, but unpacked manually, and manually copy to custom location disk D:?
Or it is something else?
Please, help me with some suggestion, if you can.
I will be greatly appreciate!
  Member 19.07.2021 47
+6
Since im using MAC (m1 monteray) and used kitty's script(for mac),
not sure that how r2r would work with it as window

so bascially what I did was
1. unregister Factory Library 2 with Kitty script
2. replaced native access (with script)
3. put FL2 on my folder, use script to add library
(FL2 would appear on kontakt, but with "not installed" message)
4. replaced with GOOD NICNT (from bob)
(and now it works but with no wallpaper)
5. replaced with with original .nicnt

Hope you would find solution from other people !!
  Member 5.12.2014 41
+2
Big Thanx Boss
  Member 21.09.2015 173
+11
the Comment has been Removed
  Member 21.09.2015 173
+11
the Comment has been Removed
  Resident 25.05.2019 226
+86
the Comment has been Removed
  Member 19.07.2021 47
+6
the Comment has been Removed
  Member 16.01.2022 46
+5
the Comment has been Removed
  Member 19.07.2021 47
+6
the Comment has been Removed
  Resident 2.10.2013 311
+86
I am on Win 10 and use Kontakt 6.7.1 PORTABLE.
I get the "... library not installed..." message.
The registry matches what Bobdule and teamCubea has specified earlier.

I hope someone find a solution for the portable version as this is the only one version I and many of us use.

Thanks for the release and all the goodies this community shares !!!
  Resident 17.06.2016 1 596
+565
6.7.1 don't take it, it will need 7
  Member 16.01.2022 46
+5
If you working on a Portable v7 and get black Screen...

Ni says:
KONTAKT 7 requires a graphics card that supports Direct 3D 11.1 rendering or above. If your graphics card does not support this requirement, KONTAKT will open with a black window and will not function
  Resident 26.08.2013 807
+132
Wow this GUI people love is going to kill us in the end. Update CPU, Update GPU. Or nothing will work.
  Resident 10.09.2018 1 606
+109
Hi all,

What am I missing here?
I want to load a preset and this message pop's up!
"this instrument belongs to a library that is not installed currently"
Anyone?

UPDATE: Thanks to: TeamCubeadooby for the solution! Works like a baby in the Moonlight! :-) Except that Cubase is crashing 9 out of 10 starting a project with Kontakt 7 in it...

quote by TeamCubeadoobyI completely figured out why it says "library not installed" or whatever it is, it says. This is extremely simple.

C:\ProgramData\Native Instruments\Installer Log\Kontakt Factory Library 2 1.0.4.1 Setup PC Log.ini

must match the data at:
HKEY_LOCAL_MACHINE\SOFTWARE\Native Instruments\Kontakt Factory Library 2
for correct path, HU and JDX.

With this information, you can move the library about, and manually install it to other machines if you want it in only one location. Don't forget the Service Center 2 files (one for NativeAccess, the new one from R2R and one for the new library itself.) And for that, this folder copied to other machine, too:
C:\Program Files\Common Files\Native Instruments\Kontakt Factory Library 2

But if you DO move the library, you have to edit the registry here TOO:
HKEY_LOCAL_MACHINE\SOFTWARE\Native Instruments\Kontakt Factory Library 2

So, make it all match up. Tested and proven, for sure for sure, working.
  Banned 4.06.2022 105 757
+9637
quote by Pauluz :-) Except that Cubase is crashing 9 out of 10 starting a project with Kontakt 7 in it...


You're welcome. Do what you have to do to get the original factory .exe, .vst3 and .aaxplugin. Maybe UniExtract2 RC3 (scroll down to "Download") works on the installer to do this. In any case, get them somehow, even if you need to re-install. You need clean original untouched files. Then patch them with latest v3 from Bob. This is the path to giving the best chances for least crashes or none.

Spread the Word