[PATCH] KillerBugs v2 for Avid Pro Tools 10.3.5 HD

works ok but this needs a custom SN like reason 5 so all u need is install and enter the fuckin SN, installed fine but wont load up gives me a error.

Darth Vader

pro tools 10,
don't work for me w7 x64 sp1

Access Violation

back to 10.3.4

create skrenshot video and show program about window with error Access Violation please

it gives no errors but wont start and stops working then u have to shut it down, AVIDs been ripping people off for a long time and the APP is shit with a capital S

Jizera

Hello...good news,thanks to all!!!

Most people here talked about workin 32-bit Win7 system or not specified version,..OK, but nobody confirm 64BIT WINDOWS 7 VERSION.

CAN ANYBODY CONFIRM WORKIN 64BIT 10.3.5 VERSION?

Thank You..

win8 64bit...working perfect 100 percent...make sure you install 64bit killer bugs

i had one problem :

app was dropping my interface randomly,

i set the clock to 44khz/24 bit - problems solved. its 48/24 by default. try it !

also, dont use the app without your external interface plugged in. pt is not designed to run ok with asio4all.

Darth Vader

don't work for me w7 x64 sp1

I'm also running the same system. If you read my previous posts, you'll notice I was having problems as well. The issue happened when I duplicated tracks. I think more than 16 caused memory Access Violation errors. Fixed it by going to "Setup > Playback Engine > Disk playback," and increased the "Cache Size" from "Normal" to "2GB" That fixed the tracks causing the Access Violation error. However, I still seem to get Access Violation errors every once and a while. Does anyone know if it's because of running other programs while running PT? Should PT be running by itself at all times when opened? Hell, it's using more then 5GB on it's own when it starts.

iys a shit DAW bro simple as that,

@navid811
Is you smoking to much happy weeds and dry fishs
this release needs no seriial number

All Daws have good features and bad but this release is more
to congratulate teams who Worked hard on reversing / workaround
the ilok ptotection Keep in you mind without the teamwork
from all individuals we would not see this product to trying
if Is good or not so good
In you opinion this is shit in others opinion is maybe not so shit
Either way be thankful we had chance to use no knowing if suits needs

back in 10.3.4 is work 4 me and many people

@makaveli
Strange to say this 10.3.4 is also killerbugs patch
so you 10.3.4 is shit as well ?
Maybe think with u brain before type in post next time

Well decided to trying this version due to AAX2
include with 10.3.5 as mentioned from avid and some 3d party developers
this version with Above patching is working
Runtime stable last 24 hours
System : Win7 x64 Sp1

Do you need a I lock for this to work?

tekhead909

Do you need a I lock for this to work?

No install ilok drivers and the Protools
run patchs

when pro tools is loading there's a problem with Kontakt 5...
says the ilok is not present or the plug in is damaged

pro tools 10

stay away from asio4all.

What??? I'm using a Behringer UCA202 USB audio interface with ASIO4ALL and I don't understand what you're talking about. What do you mean?

because Killer Bugs v2 for pro tools 10.3.5 is a lower version (version 2.0.0.24) to Killer Bugs for Pro Tools 10.3.4 (version 2.0.0.43). According shows file properties.
Would have to be a superior version?.
Maybe? Killer bugs 2.0.0.43 pro tools work with 10.3.5?

@tomtom
maybe 10.3.4 is shit too who cares and who knows
it's not problem whit those copies of pro tools 10.3.4 or 10.3.6 + but all the problems with patch and KillerBugs " its big name "
final point avid make people very hungry
so keep make good musique , peace yo

its all in how you configure youre latency settings in the app exp.. 256, 512 ect.
also set it up to record to other HD like f, g drive ect... make sure to you have Microsoft visual studio 2010 or higher as this gives you all the proper .dll and latest frameworks to
run this GLITCH Free.. Common Sense A Clean OS Install, will give u the most reliability
with youre Setup, take the time and do it right, if your serious about RECORDING MUSIC...
PROTOOLS IS the Pro Industry Standard like it or not..

Paceap site has changed. Where do you guys download the latest ilok drivers?

My opinion,some get it work some not.
It's depend on audio interface and it's driver.
I test with m-audio fast track ultra usb and it crash crash crash.
Then with mackie profx 12 usb mixer with asio4all driver,i can't make it crash anymore.
I'm not configure anything,just change interface and it's driver
I have this experience since 10.3.0 release.
Don't know other interface cause i just have this two.
and i want to know the lucky guy who get it working and which interface they use

I had Pro Tools 8.0.4. I uninstalled and reg cleaned. I then installed 10.3.5 + Team VR Beta 7 + KillerBugs v2= Access Violations

I then uninstalled (no reg clean) 10.3.5.
I was going to install 10.3.2. but couln't find the installer and I still had version 10.3.0 from when I did the trial as PT10 was being first released. (At the time I didn't know about 10.3.4 being reported "stable")

Pro Tools 10.3.0 + Team VR Beta 7 + JustTrying v5= No issues (so far)

Therefore I say...if you can't name 1 update/improvement from 10.3.0 to the 10.3.4/10.3.5 update:
1. just install 10.3.0 and be done.
2. wait for 10.3.6 to be "stabled" (I think its going to probably be (one of) the last updates for PT10) or
3. Wait for PT11.

because killerbugs v2 for Pro Tools 10.3.5 is a minor release (version 2.0.0.24) to killer bugs for Pro Tools 10.3.4 (version 2.0.0.43). As shown in the file properties.
should be a higher version?.

that more stable version.

sum one post the killerbugs 2.0.0.24

@ Navid811,

sum one post the killerbugs 2.0.0.24

!?!
Why you don't download it directly ? The 'Zippyshare' Link is still active
at this time...

3 system freeze in 10 minutes -> uninstalled. piece of crap.

whats the best combo people ?

@ Pro Tools 10,

whats the best combo people ?

I don't even tried that new 'v10.3.5', I stayed with the previous version : 'v10.3.4', which works perfectly and smoothly for me.
I must even admit that I'm very surprised of it, it's even more reliable
and stable that other DAWs that I use regularly !
This is under 'Win7 Ultimate Edition' (x86-32bit) and with the 32bit version of 'Pro Tools', so I can't testify the same with the 64bit version, but there's no reason that all is working fine with it too...

So, at this time, my 'best combo' is :

1. Download (from where you know !) and install the 'v10.3.4'
2. Apply the Patch Pro Tools HD 10.3 patch (beta 7)
3. Apply the Patch Avid Pro Tools 10.3.4 To Audioz (by 'Team Brazil APP'
& 'MJones')

I heard to bad feedbacks about that 'v10.3.5' and the 'Killer Bugs' Patch versions to not even try them... and as my present version is running
so well, I don't want to change it in any way, even if the 'v10.3.6'
contains at least 2 important fixes that I would to get...

For the 'ASIO' drivers, I use either these of my Audio Interfaces, as well as I can have 'Asio4All' working properly. I don't understand why some users get troubles with it (?).

About the 'AAX' plugins : these that come as Factory (24 in my case)
are all working fine, I also get several 'third-parties' AAX working fine,
and some can't be used as they need an 'iLok' authorization...
I also use almost all the available 'RTAS' counterparts of my 'VSTi/VST' Plugins, and all are working fine and flawless...

Friday,
I test with m-audio fast track ultra usb and it crash crash crash.

bro, Avid owns fast Track Family. M-audio owns the rest.

testing here of this version 10.3.5 and after 48hour it work perfectly
if you follow in the instructions provide in posting is NO issues on installing

- Testing Asio4all - Cirrus Logic CS4206A (AB 09)
- Time 24 hour - working no crash - Stable

-Testing Focusrite Liquid Saffire 56
- Time 24 hour Working no Crash - Stable

@ Pro tools 10

pro tools 10

72 hours running without glitch. well done MASTERs !i'm not using waves r9 but waves r8 and that doesnt show up in PT but who cares, pt plugs are deadly. air virtual instruments r perfect. use 44khz/24bit as default! on 10.3.4 i tried asio4all - system freeze(hard reset). on this one i'm only using toneportUX1 ASIO driver - perfect. you NEED a usb audio interface with this to work smooth. stay away from asio4all.

pro tools 10

3 system freeze in 10 minutes -> uninstalled. piece of crap. whats the best combo people ?

How u testing 72 hours then come to saying this ?

Maybe need to deciding working or no working for you

Very strange every time you trys Pro tools 10 nothing working for you

Sovivoloko thank you! works fine

I followed the instructions. Works fine!
by the way. I had some issues with some of my plug-ins but solved them. Pro tools moved KONTAKT to "unused". It hapened because I had KONTAKT installed in a different location (which was my choice when installing the plug-in). The same with Waves Package. what I did was copy the ".dll" of each plug-in to pPro Tools right direction: "C:\Program Files (x86)\Common Files\Avid\Pro Tools"
Hope it helps you!

many many thanks to TEAM VR and GAZ 51.

and Sovivoloko (The one man army), from the Brazil.

meyk,
Finally,Avid release update for FTU driver and it work perfect with 10.3.4.