HoRNet VU Meter v2.2.0 BOUGHT HY2ROG3N

WIN: x86/x64 VST/VST3/RTAS | RAR SIZE: 1.36 MB | EXTRACTED RAR SIZE: 3.04 MB
HoRNet VU Meter
The HoRNet VU Meter is a little smart tool that let you see the real strength of your signal

Knowing exactly the intensity of the signal you are putting inside your DAW is crucial if you want to use your equipment in its sweet spot, this plugin is inspired by this thread on GearSlutz ( a must read ) and it's useful to avoid recording your signals to hot.

Every A/D converter from the cheapest one to the most expensive has an analog front-end before the actual conversion takes place. Since analog must obey to the law of physics there is just a certain amount of current that you can pass without having distortion in the signal. Usually the manufacturer of converters set the +4 dBu (the "sweet spot" and what is usually shown as "0" on VU meters) to -18dBFS after the conversion, so if the meters of your DAW reads -3dbFS while you record, you are actually driving the input stage of your converters to +15VU, that is A LOT of current flowing through your electronics.

VU meters where the standard metering system before the digital revolution and they still are one of the best way to evaluate the intensity of a signal, their response is intentionally slow to show the perceived loudness of the signal and not the peak.

Multiple colors

Choose between twelve different colors for your VU Meter, each instance of the VU Meter may have a different color. Use this features for your drums for example so that you can quickly see the level of each track you are recording! Red for kick, blue for snare and so on! Click on the colored square in the VU Meter GUI to open the color picker.
Automatic Gain

VU Meter auto gain

Never let your signal peak too high! With the Auto Gain function the HoRNet VU Meter will adjust it's gain knob so that the signal level ha it's peak value to +2VU. This means that if the signal is too low the VU Meter will rise the gain, if it's too high it will lower it.

The final result is that your tracks will always peak at the right level avoiding clips and distortion in any processor after the VU Meter
How to use it

One of the best way to use the HoRNet VU Meter is to put it on the track you are going to record, click on the dBFS reference number and set it accordingly to the specifications of your converter, then forget about your DAW peak meters, try to make your signal peak at 0VU at most, or if you want to be hot aim to +1VU or +2VU, don't worry about clipping the signal, the HoRNet VU Meter will blink RED if the signal is clipping.

If you are not recording you can still use the VU Meter to drive other processors, using the Auto Gain function you will be sure that no overload will ever happen and even analog emulating plugins will be happy with the level of the signal

Features

VU Meter spec. conformity (300ms attack and release time)
VU Peak hold
RED Blink clipping indicator
reference level settable from -20 to 0 dBFS
input gain from -60dB to +15dB
bar color freely selectable between 12 colors
Automatic Gain adjustment with 3 different settings
Stereo display

Whats New in v2.2.0:

Added RTAS support
GUI update
Fixed VST3 issues