Wave Arts Tube Saturator v1.35 WIN OSX

30 March 2016 | WiN: 37.9 MB | OSX: 40.9 MB
Tube Saturator is the world’s most accurate real time tube amp plug-in. Unlike other tube simulators, which use radically simplified models, Tube Saturator uses state of the art circuit simulation technology to capture every nuance of an analog circuit. With circuit simulation, the analog schematic (consisting of the individual resistors, capacitors, tubes, and so on) completely defines the signal processing. The schematic is converted into a system of non-linear differential equations which is solved at each sampling period, in realtime. That’s mathematical talk for “it sounds exactly like the analog circuit”.

The circuit simulation technology is extremely CPU intensive, and hence we are only able to simulate very simple circuits at this time. A fast computer is highly recommended to run the plug-in. Tube Saturator is in fact a basic circuit consisting of a Baxandall type three-band EQ feeding two 12AX7 triode preamp stages. It’s similar to preamp stages you’d find in a guitar amp, but it is by no means a complete guitar amplifier model— that would be way too expensive to simulate even with today’s fast CPUs. However, it is extremely accurate, and hence you can get the same distortion and tonal characteristics that you’d expect from a real tube preamp.

Use Tube Saturator to add a bit of analog warmth to recordings, or increase the drive for some distortion. You can use it as a saturating peak limiter too.

Increasing the Drive control increases the (digital) input gain while decreasing the (digital) output gain, so you can easily adjust distortion levels. The FAT switch changes the bias circuit of the first preamp stage to increase gain.

Tech Specs
Accurate tube preamp simulator using circuit simulation technology
Two common cathode preamp stages
12AX7 and 12AU7 tube models
Drive control for distortion adjustment
Baxandall 3-band analog EQ
Saturation and EQ bypass switches
High quality 2X oversampling mode
Wet/dry mix control
Analog style metering
No latency
Up to 192 kHz sampling rate
Mono or stereo

Change Log:
AAX format fixes:
Master Restoration Suite: individual MRS plugs showing incorrect parameter values is fixed.
All plugs: fixed touch automation, parameters used to oscillate during touch automation.
MultiDynamics AAX DSP: fixed issue where certain bands would not show any signal level after preset load, requiring close/open.
Panorama: fixed disappearing control at elevations below zero.

All formats fixes:
Panorama: fixed CIPIC HRTFs missing from individual installer payload, Mac only.
Fixed version numbers that appear in Get Info popups for all Mac plugs.