sonible smartreverb 2 v1.0.1-TeamCubeadooby

Filespayouts | Rapidgator

Filespayouts | Uploady | FreeDlink

I'd rather try it myself than listening to the banshee

1000% agree!

The case of the so-called "bad compression" was due to someone apparently attempting to dissect the installer with what most likely amounts to a faulty or outdated setup extractor. Obvious end user issue and nothing more...

Uninstalled.
The same issue persists: circles disappear after a few seconds.
The behavior is identical with OpenGL enabled or disabled.
\Windows 11 fully updated / Studio One 7

This is a very interesting information, cause can really indicate the possibility that the plugin is calling home to work with no issues, and when using a VPN is not being able to receive some information from "home"... Thx for the heads up, i dont use a VPN but blocked Reaper in firewall going to try to unblock and see if it works...

No VPN here, could not find a firewall rule blocking anything at reaper or in hosts about sonible, but as we have lots of entries in the hosts file, could be from another "blocking" but even disabling the Windows Firewall, control show show and vanish after 4 secs. Already unisntalled and reinstalled all the dependencies too. Tried in a clean machine and it works... Going to keep looking to try to provide a solution to others too...

PowerShell Script for Network Diagnostics and Reset (Multicast + Loopback Fix)
This is a multi-step script focused on solving multicast and local loopback network issues, especially when using plugins like Sonible Smart Reverb inside Reaper.

✅ What this script covers:
✅ Check if Windows Firewall is blocking
✅ Check if TinyWall or other third-party firewall tools are active
✅ Check if Reaper.exe has firewall exceptions
✅ Check for any multicast blocking rules
✅ Fully reset TCP/IP stack and Winsock (step 4 that you might not have tried yet)
✅ Clear any cached routing tables
✅ Force IPv4 multicast loopback reactivation

✅ PowerShell Diagnostic and Network Reset Script:
Copy and paste this into PowerShell (Run as Administrator):

powershell
Copiar
Editar
Write-Host ">>> Network Diagnostic and Reset for Multicast + Loopback <<<" -ForegroundColor Cyan

# 1 - Check Windows Firewall status
Write-Host ">> Current Windows Firewall status:" -ForegroundColor Yellow
Get-NetFirewallProfile | Format-Table Name, Enabled

# 2 - List active firewall rules for Reaper
Write-Host "`n>> Existing firewall rules for Reaper.exe:" -ForegroundColor Yellow
Get-NetFirewallApplicationFilter | Where-Object { $_.Program -like "*reaper.exe*" } | Format-Table Program, DisplayName

# 3 - Check if TinyWall (third-party firewall) is running
Write-Host "`n>> Checking if TinyWall is running:" -ForegroundColor Yellow
Get-Process | Where-Object { $_.ProcessName -like "tinywall*" }

# 4 - Check for any multicast UDP blocking rules
Write-Host "`n>> Checking for multicast-related firewall rules:" -ForegroundColor Yellow
Get-NetFirewallRule | Where-Object { $_.DisplayName -like "*Multicast*" -or $_.RemoteAddress -like "226.*" } | Format-Table DisplayName, Direction, Action, Enabled

# 5 - Full TCP/IP Stack and Winsock Reset
Write-Host "`n>> Resetting Winsock and IP Stack..." -ForegroundColor Green
netsh winsock reset
netsh int ip reset

# 6 - Flush routing cache
Write-Host "`n>> Flushing routing cache..." -ForegroundColor Green
route -f

# 7 - Flush DNS cache (not related to multicast, but part of the full network reset)
Write-Host "`n>> Flushing DNS cache..." -ForegroundColor Green
ipconfig /flushdns

# 8 - Reminder: Reboot required
Write-Host "`n>>> IMPORTANT: After running this, you MUST reboot your computer before testing Sonible again!" -ForegroundColor Magenta

✅ Final tip :
This script is safe for typical users, but they should save any static IP settings first if they use manual configurations.
Also, temporarily disable TinyWall or any third-party firewall while testing Sonible after reboot.

For me solved now

PowerShell Script for Network Diagnostics and Reset (Multicast + Loopback Fix)
This is a multi-step script focused on solving multicast and local loopback network issues, especially when using plugins like Sonible Smart Reverb inside Reaper.

✅ What this script covers:
✅ Check if Windows Firewall is blocking
✅ Check if TinyWall or other third-party firewall tools are active
✅ Check if Reaper.exe has firewall exceptions
✅ Check for any multicast blocking rules
✅ Fully reset TCP/IP stack and Winsock (step 4 that you might not have tried yet)
✅ Clear any cached routing tables
✅ Force IPv4 multicast loopback reactivation

✅ PowerShell Diagnostic and Network Reset Script:
Copy and paste this into PowerShell (Run as Administrator):

powershell
Copiar
Editar
Write-Host ">>> Network Diagnostic and Reset for Multicast + Loopback <<<" -ForegroundColor Cyan

# 1 - Check Windows Firewall status
Write-Host ">> Current Windows Firewall status:" -ForegroundColor Yellow
Get-NetFirewallProfile | Format-Table Name, Enabled

# 2 - List active firewall rules for Reaper
Write-Host "`n>> Existing firewall rules for Reaper.exe:" -ForegroundColor Yellow
Get-NetFirewallApplicationFilter | Where-Object { $_.Program -like "*reaper.exe*" } | Format-Table Program, DisplayName

# 3 - Check if TinyWall (third-party firewall) is running
Write-Host "`n>> Checking if TinyWall is running:" -ForegroundColor Yellow
Get-Process | Where-Object { $_.ProcessName -like "tinywall*" }

# 4 - Check for any multicast UDP blocking rules
Write-Host "`n>> Checking for multicast-related firewall rules:" -ForegroundColor Yellow
Get-NetFirewallRule | Where-Object { $_.DisplayName -like "*Multicast*" -or $_.RemoteAddress -like "226.*" } | Format-Table DisplayName, Direction, Action, Enabled

# 5 - Full TCP/IP Stack and Winsock Reset
Write-Host "`n>> Resetting Winsock and IP Stack..." -ForegroundColor Green
netsh winsock reset
netsh int ip reset

# 6 - Flush routing cache
Write-Host "`n>> Flushing routing cache..." -ForegroundColor Green
route -f

# 7 - Flush DNS cache (not related to multicast, but part of the full network reset)
Write-Host "`n>> Flushing DNS cache..." -ForegroundColor Green
ipconfig /flushdns

# 8 - Reminder: Reboot required
Write-Host "`n>>> IMPORTANT: After running this, you MUST reboot your computer before testing Sonible again!" -ForegroundColor Magenta

✅ Final tip :
This script is safe for typical users, but they should save any static IP settings first if they use manual configurations.
Also, temporarily disable TinyWall or any third-party firewall while testing Sonible after reboot.

For me solved now