REQ: HY Plugins Loop Reconstructor (MaxForLive)
Their VST's are among my favorites so looking to try this M4L device out and see how it compares.
INFO:
HY Plugins Loop Reconstructor (MaxForLive device)
Signal Path
There are 5 sampler units.
Each output of sampler unit is connected to gate unit.
You can control those gate by trigger sequencer.
Sample Import
Drag and drop your audio files to square field 1 to 5
Sample Editor
Sample Bar Size
If loaded sample is 2 bar sample, set this switch "2Bar".
Editing Sample Playback Points
Loaded sample is automatically divided to 16 playback points.
You can adjust those playback points.
*You can’t change playback order of playback points, like Slicer.
Example
If there are some gaps between playback position and waveform,
you can adjust playback points manually like picture below.
Reset Button
You can reset positions of playback points.
Pan, Volume, Mute/Solo
You can control pan, volume, mute/solo state here.
Gate Section
You can make gate patterns here.
Those gate patterns are triggered by gate sequencer.
Example1
In this case, no gates will be triggered.
So you will not hear any sounds.
Example2
In this case, gate1 will be triggered at step1, gate2 will be triggered at step2 and so on.
Reverse and Lock
If rev is active, playback sample will be reversed at that step.
If lock is active, that step will not be affected by randomize action.
Pattern Generator
Clicking “Generate” button, grid pattern will be generated.
Example1
In this case, all buttons are active, so result will be like picture below.hyloopre4_example1_result
Example2
In this case, only button 3 and 5 are active, then result will be like picture
Gate Sequencer Control
You can control gate sequencer here.
Save/Load
You can save/load 8 snapshots.
INFO:
HY Plugins Loop Reconstructor (MaxForLive device)
Signal Path
There are 5 sampler units.
Each output of sampler unit is connected to gate unit.
You can control those gate by trigger sequencer.
Sample Import
Drag and drop your audio files to square field 1 to 5
Sample Editor
Sample Bar Size
If loaded sample is 2 bar sample, set this switch "2Bar".
Editing Sample Playback Points
Loaded sample is automatically divided to 16 playback points.
You can adjust those playback points.
*You can’t change playback order of playback points, like Slicer.
Example
If there are some gaps between playback position and waveform,
you can adjust playback points manually like picture below.
Reset Button
You can reset positions of playback points.
Pan, Volume, Mute/Solo
You can control pan, volume, mute/solo state here.
Gate Section
You can make gate patterns here.
Those gate patterns are triggered by gate sequencer.
Example1
In this case, no gates will be triggered.
So you will not hear any sounds.
Example2
In this case, gate1 will be triggered at step1, gate2 will be triggered at step2 and so on.
Reverse and Lock
If rev is active, playback sample will be reversed at that step.
If lock is active, that step will not be affected by randomize action.
Pattern Generator
Clicking “Generate” button, grid pattern will be generated.
Example1
In this case, all buttons are active, so result will be like picture below.hyloopre4_example1_result
Example2
In this case, only button 3 and 5 are active, then result will be like picture
Gate Sequencer Control
You can control gate sequencer here.
Save/Load
You can save/load 8 snapshots.