Euro Reakt 4.2 [140 NI Reaktor Blocks] [FREE]

Euro Reakt Changelog
====================
4.2 (04/03/2017)
---
(AKA The "Gate Schwifty" Update)
The latest set of Unfiltered Audio builds has been turned in (lots of new stuff coming!), so I found some time to tackle some sequencing Blocks that I've been meaning to write. I've also updated the dissertation to reflect the required formatting.
- NEW BLOCK: Accumulator. This Block has gates for Add and Subtract. When a gate is received, the value set by DEPTH is added to or subtracted from the current output. A Reset gate sets the output to 0, while a Drunk gate randomly adds or subtracts. There are both Stepped and Slewed outputs. When combined with a Quantizer, this can create very fun arpeggiated sequences.
- NEW BLOCK: Rotator. This is a Block I've been meaning to add for a long time! This takes up to 8 inputs and rotates them around 8 outputs. It is inspired by the 4ms Rotating Clock Divider, but it is more generic and can rotate any set of inputs.
- NEW BLOCK: ES-5 Converter. This Block takes in 8 gates and encodes them for use with the Expert Sleepers ES-5 gate expander. It is a simplified version of the ES-4/5 encoder by bendedavis (https://www.muffwiggler.com/forum/viewtopic.php?t=151653), and is intended only for setups with one expander connected.
- UPGRADE: Added a Toggle gate and button to Binary Gate. This Block should now be functionally equivalent to Max and PD's Toggle object. I have also added an "Inv. Gate" output that is the opposite of the main gate.
- UPGRADE: Added Phase and Active outputs to Gate Delay. The Active output provides a gate that goes high when an input gate is received and goes low when the delay is finished.

4.15 (02/18/2017)
---
(AKA The "Bug Blast and Bonus Block" Update)
- NEW BLOCK: 8 Bit Cipher. This is a shift register sequencer from Nonlinear Circuits that provides 9 gates and 4 stepped CV outputs.
- FIX: SumSyn Oscillator produced a NaN value when BRIGHT was set to 1.0.
- FIX: Fixed automation mapping names for BOOLs, Hold & Slew, and Exponent.

4.1 (01/30/2017)
---
(AKA The "Life After School" Update)
This update includes the filed draft of my dissertation (under Documentation).
- NEW BLOCK: Hold & Slew. This is an expanded version of Sandy Small's Slew Limiter crossed with the Standard Library's Sample & Hold, the Serge Stepped/Smooth Generator, and Make Noise Function. The input runs through a hold circuit that switches between T&H and S&H behavior. It then runs through a slew circuit with independent control of rise and fall times. The slew circuit has a comparator at the end that fires a gate when the target voltage and slewed voltage are nearly equal.
- NEW BLOCK: BOOLs. This is a direct emulation of the Nonlinear Circuits BOOLs module. Four inputs are used to determine four logical gate outputs. The gate outputs are summed together to create a stepped sequence. The stepped sequence is then slewed to create an additional smooth output.
- NEW BLOCK: Exponent. Warps any signal to exponential or logarithmic behavior. This is intended for modulation, but it can be used as an audio waveshaper as well.
- UPGRADE: Added a three way noise switch and external input to Hi-Hats 2.0.
- UPGRADE: Added Sine and Cosine oscillator outputs to Frequency Shifter.
- UPGRADE: Added a Dir. Change output to Delta that fires a trigger whenever the input signal changes direction.
- UPGRADE: Added a Crossing output to Comparator that fires a trigger whenever the input signal crosses the threshold in either direction.
- UPGRADE: Added a "XOR RING" mode to Bit Mix 32. It is a crude ring modulator built using XOR logic. This technique is found on modules like the Hertz Donut (the center output between the two oscillators).

- FIX: Increased the gate threshold on Clap, Drum, Hi-Hats, Hi-Hats 2.0, Karplus, Resonating Bar, Resonating Wood, and Snare. This should prevent accidental triggers from happening when using external audio signals as trigger sources.

Rest of the changelog on the Homepage!