Pulsar - Smasher (1176 Compressor) v1.0.1 x64 x86 VST VST3 AU AAX WiN MAC [Free For A Limited Time]

09.02.2020 | x64 x86 VST VST3 AU AAX WiN MAC | 243 / 79 MB
Regular price - $59 after March 11, 2020.
A straightforward extreme compressor modeled after the “British mode” of a uniquely modified 1176 compressor. Between saturation and compression, the texture of the Smasher is unique, inimitable. It doesn’t work everywhere, but if it works, go for it generously!

Pulsar Smasher is an unprecedented custom modification of the 1176 compressor circuit, which we stumbled upon while fine-tuning other algorithms.

The original 1176 compressor has 4 selectable ratios. But it just so happens that all 4 buttons can be pressed at the same time, this is called “all buttons mode” or “British Mode”. Although probably an unanticipated feature, this mode has become very popular because of its distorted, explosive and highly compressed sound. Think of it as something halfway between a compressor and a saturation.

While remaining very close to the original circuitry, this modification adds definition to the transients and makes the whole tone more aggressive. Decidedly not versatile, this effect is especially useful to enhance the ambience in drum busses, but many other creative uses are possible.

Typical effects you can get with the Smasher are the raw and gritty sounds of bands such as Vulfpeck, The Whitefield Brothers or The Black Keys.

The 1176 is a vintage FET (field effect transistor) compressor. Based on an internal feedback configuration, these designs are known to be fast and colorful, capable from soft limiting to heavily saturated tones.

In all-button mode, several things happen in the circuit, including changes in the bias voltages. For the first time, all these phenomena are perfectly reproduced, with all the associated sound peculiarities.

With our unique tuning and its beautiful and uncomplicated interface, the Pulsar Smasher gives this mythical circuit a new personality.

How does it sound ?
It can add thickness and grit to any drum or bass track, or completely crush a bus, producing an aggressive sound, impossible to achieve with other plugins.

On a drum buss
On a drum track, the Smasher will provide the typical sound of a 1176 in all-buttons mode, with the signature sound of the delayed transient squashing. The result is an explosive sound which will instantly put your drums in the front of the mix.

On a snare drum
Used on a snare drum, the Smasher adds body and sustain. We strongly encourage you to try to thicken your snare drum by reaching between -6 and -10dB of gain reduction, and then try to mix a few percent of the resulting huge snare drum sound into your dry sound.

On a bass
Since the bass track often requires a combination of compression and saturation, the Smasher is the ideal tool to get it dirty. You will be able to control precisely how much grit to add. For example, use the Mix knob to add just a small amount of fuzzy saturation.

On lead vocals
Please don’t try this at home.



Main Features

Topology Preservation Technology
Our modelling technology guarantees a perfect emulation of the original device’s behavior. From the saturation of the magnetic flux in the inductors, to the precise response of the transistors, to the effects of tiny calibration defects, everything is perfectly reproduced.

Low CPU Usage
Low CPU consumption
We spent a ridiculous amount of time optimizing Smasher to consume as few system resources as possible – despite the complex algorithms at work. Pulsar Smasher takes full advantage of modern CPUs to do more with less. But if your computer can stand it and you enjoy making it suffer, you can always turn oversampling on, processing at rates up to 384kHz!

Parallel compression
By using parallel compression, one can thick up a sound, adding sustain, without loosing the dynamic of the whole track. The Mix knob of the Smasher will allow precise adjustment of how much thickness you want to add to your sound.

Linked sidechain
On a stereo bus, for smooth dynamic control, the channels are usually compressed independently. But when high compression is required, it is essential to keep the stereo image stable. That’s why the Smasher uses a single detector for a stereo track.

ATTENTiON!!!
To activate your copy of Pulsar Smasher, you will need to sign up for a free iLok user account (valid email address required). When loading the plugin for the first time, paste the activation code provided:

0361-0304-6484-0271-4647-2634-0140-91

The license will then be registered to your free iLok user account and activated on your computer.

Sincerely, STRiKE